Viewing all customer Discussions for:

Weatherization

So... I thought our windows had a bubble stripping, but I found an intact piece during our work yesterday. I looked on the site for "leaf" style stripping... but didn't find a match. Any help finding my window's soul mate? Thanks.

I need to replace the glazing bead on several of my windows. The dimensions of my glazing bead are shown in the pictures above. I haven't been able to find a exact match but I think 55-197 is the closest match based on the tab being 1/16 from the top. I would appreciate any assistance you can provi ... (cont.)

Looking for outside curved rubber glazing bead for a curved window. Kinro windows are put into a lot of park model homes for rv parks and I cannot find any curved rubber glazing for the windows. Hope you can help me. I do have a supplier for the normal vinyl straight glazing bead, but need the sof ... (cont.)

I need to replace the glazing at the bottom of my door around the metal insert at the bottom. My glass is not the full height of the door. The exposed portion of the existing glazing is 3/8" wide. This glazing installs in a channel that is 1/4" deep and 1/4" wide with a 1/16" lip that the glazing ... (cont.)

Looking for replacement it is tube like

HelloOur house was built in 1977. We need weather stripping for the front door. I am sending a photo of a broken area of the current weather stripping. There are many areas where the flap has broken off. I do not want to remove what we have until I find a replacement, so do not have a photo of the ... (cont.)

My windows have 9/32 x 3/16 gray pile weatherstripping. However, all the corners are mitered with no clear way to open the channels -see photo. I was able to remove the existing because it was weathered/brittle and the web cracked enough to pull it vertically out - see photo. How do i remove and ... (cont.)

I have three door's 8 foot tall and one door nine foot tall. I need help to get a good weatherseal for these door's and long enough so I don't have to piece them together. Can you help.

I'm not sure what weatherstripping I'll need to replace existing ones

i need some time of rubber overlap piece to keep cold air from coming between my double doors

I need help identifying and replacing the seals needed for my windows (they are ~21 years old vinyl single-hung). As you can see, I am getting condensation because they are not working anymore. I cannot find a way to remove them and I would need help figuring that out as well. I have tried to inc ... (cont.)

I have 1990 winco casement windows that I need seal for. I have attached pictures. Mine mounts in window frame not the sash.

Bonneville casement windows made around 2010. The current material cracks into pieces when touched. One edge fits into a small glove and runs the length of the window. Thanks

Hello,Need your help identifying the exact size of the Pile/Bubble Weatherstrip. I have a mix and match of window sizes so I'll need a ballpark of how much I would need. Here's what I have:32x28 - 234x19 - 121x20 - 134x28 - 4That is just the lower part of the window that slides up/down so I think ... (cont.)

Have a 959486 Fiberglass double patio door andneed the between the doors weatherstipping. Size of the doors are 71.5x79.5

I'm working on a double 36 inch door made by old castle The door are clad in bronze I'm look For bulb weatherstripping for the active door and lower door sweep for the inactive door both in a brown color thank you

I cannot find this molding anywhere.. It holds the glass in on my back door.. Old back door lol.. I an keeping my fingers crossed..Thank you for your help. -Mary

Can you match up this old rubber/vinyl seal that holds the glazing in the aluminum frame for my storm door windows? Need about 20 ft. I have already located the Pyle for the other side. Thanks Bruce

No identification markings available

From windows 30+ years old. No markings or identifiers. Glazing presses into the wood from the exterior.