Viewing all customer Discussions for:

Weatherization

We moved into a house that was built in 1993. We have 5 exterior doors. The weather stripping has become smashed and longer seal very well. The problem I have run into is that the kerf is deep and wide. The original weather stripping has a cord built into it to press into the groove. The weathe ... (cont.)

I'm looking for the weather strip between the doors which is 1/4" thick and 5/8" wide. Also need the sweeps on the bottom of both doors. Thanks. Brent

Do you have a window seal part like the pictures below? The round part has to "fins" on each side. Thanks, Michael

Hello, I am looking for replacement weatherstrip for a Pella exterior door. The door part number is pella-car-1204-plciflh1z1-037a082awht-625s-nfrc. I'm not sure what is the right replacement to buy. Thanks for any help. Tom

https://www.swisco.com/Gray-3-16/pd/Wool-Pile/58-021 Seems like this is one of the part im looking for. But my windows also have another type strip that's included in the photos.thr damage is definitely on the pile. Let me know, i also have two sliding doors that need the same, but they look sligh ... (cont.)

Hurd patio door. Snap in Threshold gasket.

Good day! I currently have bug pile that does not seal completely (see pics). Was wondering if a longer seal is available to close the gap. Looks like the current seal is connected into the screen with what I would describe as a T slot. Any other suggestions for closing the mosquito gap would be ... (cont.)

43in length 2/8 in width2/8 in height

My weather stripping at the bottom of the door is worn out do you have replacement parts?

Hi. These are Anderson sliding doors. - I need the weather stripping at the closed end of the doorway that runs vertical and looks like a U shape as shown in the pictures. There are two, one on the inside and one on the outside. - I also need the weatherstripping that runs within the door bottom an ... (cont.)

I need new seals for my crank out windows but I am not finding the brand anywhere. Any ideas of where I should look? thanks Gary

the top of the T-slide is 3/16" and from the bottom to the top of the leaf is 9/16.

Is a bulb type available?

I need to replace the weather striping on the bottom sash of three identical double-hung Alside windows. Can you please help me identify the part number for the appropriate weather stripimg? Thank You.

I believe the existing windows are Jeld-Wen. I am looking to source pile weatherstripping for the cross rail, bulb type weatherstripping for the sill and a new compression jamb with internal spring balance. The compression jamb has a failed spring on one side. The jamb is 3-3/8" wide by 73-1/2"/74- ... (cont.)

Windows are very drafty. Pile is very uneven, goes from smaller space to space that just about touches. Right now it measures 1/4 X 1/4 do you have a pile slightly thicker to give it a tighter fit ? Now it has a plastic backing that slides in

Would like to know the name of each piece. And if there's a higher rated replacement for ivy rays

I'm sending pictures of the end of the seals.

Hello, Pella identified a replacement rainstrip for my window by this part number: 0CMP0001 - AST/DS/LS3 Rainstrip 195" Do you have this part or an equivalent in stock for me to order?

Hi i need a replacement for a guardian sliding patio door weatherstrip where they interlock. Length is 78". Pls see attached picture. Thanks