Viewing all customer Discussions for:

Weatherization

Is this product sold in longer length 94 in as example.

In search of white T-slot bubble weatherstrip. Slot 3/16 and bulb about 1/2 inch. I need 10 feet.

weather stripping for a Milgard vinyl horizontal slider window.The "base" is .25" wide and .02" thick. The vertical piece in the center is .17" high including the base.Don't know the height of the pile, it's worn. Probably .25".I need 75 feet.Can you help?Thanks Scott

I am in search of replacement rain/weather stripping that runs along the bottom of the double hung windows. It measures 5/8" wide with notches on either end

One inch wide for "t" at bottom of storm door. Cole Sewell and shows Cambridge Series St. Paul. CA508950.This is for my mother but she doesn't have internet.

Replacement of beading

my patio sliding door is 43 years old and needs new weather stripping can you tell me what i need it goes on the outside of the door where it opens and closes

Windows appear to be as aluminum although builder literature says they are vinyl. T slot for seal . Plastic piece is 3/16 inch wide with a 1/8 inch extension to bubble. Bubble seams to be 5/16 inch around with 2 "legs" that extend and flatten out against sill plate under bubble when window is close ... (cont.)

I'm having a hard time finding this profile. Do you have a suitable product for this application? Thank you The clip portion is about 1/4". I hope this helps

I attached 2 pics is this one the best fit? The pile is pretty beat.

The seal that forms a tight fit between the bottom and top window is warn out. It slides into a groove. Currently without the seal there is an air gap between the two windows when they are locked. The cold air just pours into the room through that narrow slit.

Hello, I am looking for wool pile weatherstripping for the 5305 Gorell double hung window. I have enclosed some pictures for you. Hope this helps. Thanks Barry

I ordered 3/16 x 3/16 but it's loose. I think it's a 1/4 x 1/4. Can you help me identify correct size? Also my single hung window does not come out completely. I have pictures too.

I have Home Depot "AMERICAN CRAFTSMAN" replacement windows that have over the years now have gaps between the felt and frame. Can you supply replacement felt and what is the replacement procedure?

Hello. I will be replacing the pile weather stripping on windows. I'm confident I have the right pile (58-127) for my Nuair single hung windows . It's fairly simple to remove the old pile from the sash side, but I'm not sure how to do it for the pile that's installed on the window frame side. There ... (cont.)

looking for a larger quantity of the 58-114 weatherstrip. dso you have it on rolls?

as above

Trying to replace pile weather strip

Hello, I'm looking to replace my weather seals. They look like they measure at 1/4 inch wide across the base. I was thinking 3/16 would work.

This is the weather stripping I need, what I ordered was wrong.. I need enough for two doors Thank you