Viewing all customer Discussions for:

Weatherization

I'm having a hard time finding this profile. Do you have a suitable product for this application? Thank you The clip portion is about 1/4". I hope this helps

I attached 2 pics is this one the best fit? The pile is pretty beat.

The seal that forms a tight fit between the bottom and top window is warn out. It slides into a groove. Currently without the seal there is an air gap between the two windows when they are locked. The cold air just pours into the room through that narrow slit.

Hello, I am looking for wool pile weatherstripping for the 5305 Gorell double hung window. I have enclosed some pictures for you. Hope this helps. Thanks Barry

I ordered 3/16 x 3/16 but it's loose. I think it's a 1/4 x 1/4. Can you help me identify correct size? Also my single hung window does not come out completely. I have pictures too.

I have Home Depot "AMERICAN CRAFTSMAN" replacement windows that have over the years now have gaps between the felt and frame. Can you supply replacement felt and what is the replacement procedure?

Hello. I will be replacing the pile weather stripping on windows. I'm confident I have the right pile (58-127) for my Nuair single hung windows . It's fairly simple to remove the old pile from the sash side, but I'm not sure how to do it for the pile that's installed on the window frame side. There ... (cont.)

looking for a larger quantity of the 58-114 weatherstrip. dso you have it on rolls?

as above

Trying to replace pile weather strip

Hello, I'm looking to replace my weather seals. They look like they measure at 1/4 inch wide across the base. I was thinking 3/16 would work.

This is the weather stripping I need, what I ordered was wrong.. I need enough for two doors Thank you

Hi, do you have something that works for this kerf seal? We will accept black or bronze. Is it possible for you to send samples for what could work?

We installed an entry door for a home owner back in 1994. He needs the q-lon/weather stripping replaced as shown in the picture. Do you carry anything like this that would be a sufficient replacement? Thanks

I have a Pella sliding glass door. I need to replace the weather stripping og the HANDLE SIDE of the door. The info etched in the glass is as follows 16cfr1201h sgcc1985 ccg3mm Please provide part number that I need to order.

Hi, Need to replace weather stripping on our 8' Andersen slider.

Looking for a glazing bead for Georgia aluminum windows

This sill track exterior gasket has a hard plastic base 5/16" wide. Originally the back of the base had adhesive which held it to the sill track. The plastic base was vertical against the track and one edge of the base fit into the tiny track next to the sill track. The diameter of the tube is 5/16" ... (cont.)

i have a french door exterior the attached image is my seal demintions. 3/8 round x 5/16 plastic edge to slide in track on aluminum when door closes.do you sell one of these it is appx 82 inch legith

I need the black floor for my garden window. I believe it is approximately 36"×13". I believe the black floor is 7/16 in thickness. I also need the glazing bead around the windows. Please see attached wlpictures of window. Thank you for your assistance.