Viewing all customer Discussions for:

Weatherization

No question but comment. Our 20 yr old Andersen 200 series tilt wash bottom seals are failing. The kerf 5/16 bubble seal are a perfect replacement! Highly recommended.

Can you identify this part? Also, how is it attached - screws, glue, staples, etc.?

Looking to replace pile and bubble weather stripping on a window. Approximately 24x37.

Hi: This is on the bottom, and is a guide / seal retainer for the the bottom of the door. Can you tell me what it is actually called and what if any my replacement options are? Thank You!

Hello Swisscom, I am looking for two pieces of white vinyl snap trine for a white vinyl double pane sliding glass door. The first piece is 45.5 inches and the second is 74 inches. The inside sash of the door says ,' Series 8500 AAMA/I.S. 2-97 SGD-C30- 96x96.

Having problems locating this piece of glazing vinyl, was told it was Jeldwen

Hi, Need weatherstripping for Milgard vinyl windows (probably installed 1999-2000). Measured the width of the bottom strip, and it's 3/16". More difficult to measure the height, but I'm guessing about 3/16" as well. It's grey colored, wool/pile..I guess. Can you help with a few suggestions ? Than ... (cont.)

Have bay windows with the jel-n-203 sticker, needing new bottom seals for the lower window, The windows are wood frame, double hung.The seals are a "T" shape with a bulb seal, that press up into a slot in the bottom of the window.Are these parts available from Home Depot or Lowes???Thanks for any h ... (cont.)

This gasket is pulling out of the windows 9 years after installation

I need replacement strips for the bottom of my patio door. These strips slide into the bottom of the door which helps in opening and closing made easier. This door was purchased from Larmco along with replacement windows, 20 years ago.

See photos for size and color weather strip removed...Built my home in 2005, all windows are Jeld-Wen which no longer supply weather stripping for this awning window. Jeld-Wen referred me to you for help.Thanks for your help and look forward to your responseRegards,nFox

I have KVW sliding windows from Kolbe that I need replacements for and the dimensions look to be 1/4 x1/4 with the plastic backing being 3/16 wide Any chance you have a replacement product?

The plastic on the bubble weatherstripping of my Jeld Wen double hung window is broken and cracked. The base extension is 1 cm high and the bubble diameter is 1 cm. It appears to be foam filled. I've attached photos but the strip totally fell apart so it may be difficult to see what it looks like. ... (cont.)

installed in 2003 by Harmon/Portland glass

I've seen other's mention this on your site. We have Florida home (probably built around 2000 or little earlier) that has plastic trim around the windows. The trim is breaking and disintegrating at this point. Do you know what trim this is and do you carry it? Thanks

This sliding door was damaged in the recent hurricane. The acrylic panel measures 40" X 50" X 1/8" thick and is a bronze color. The aluminum track has a 1/4"slot. The glaze or weatherstripping is 1/8" X 1/4". I am lost on where to get the door repaired or where to purchase the acrylic and Glaz ... (cont.)

I'm looking to replace white aluminum glazed beading for my Lawson SH-7500 windows. The beading measures 5/8 on the front side and 3/8 on the back with a slight curve up. I've attached 2 views. Any help would be appreciated. Thank you.

Hi,I need weather stripping for the images attached above. I do not have the product that was there before as the painter said it was incorrect and threw it away. These are wooden doors, one a front entry door and the other one is a garage into laundry room door. They look similar to me and I am ... (cont.)

Replacement snap-in glazing bead strip for ( living window Corp )

Weather stripping disintegrated. Needs to be replaced with a similar product I need help deciding what product to get.