Viewing all customer Discussions for:

Weatherization

Hello, I'm looking to replace the worn-out weather stripping on my BFRich windows. I included pictures of the existing stripping. I would rather get something with a longer lasting material if available. Thank you! Clair

Looking to replace weather stripping on CARADCO casement windows installed in 2003. I have already done cranks and while doing that noticed substantial deterioration of the weather stripping.

This rubber stripping around our casement windows is worn and sticky making it difficult to open and shut the windows. Can you identify a replacement?

Do you carry replacement side and bottom felt weatherstripping for certainteed windows

Hello,I have a Certainteed window that needs its bottom weatherstripping replaced. I placed an orderfor your 5' Dual-durometer Weatherstrip (58-164-5) because the dimensions matched. The product seemed like a good fit (see attached photo) but unfortunately I think the T is too rigid. The original we ... (cont.)

Would you please advise if you have a replacement for this weather seal for my vinyl windows? It measures 1/2" (facing) and then another 1/2" underneath.Thankyou in anticipation of your assitance,With Kind Regards,Patricia

HELP!What I ordered was 10 packs of 58-171 but the bulb seems to smaller as well as the T. I have only used one pack.Thank You,Jimmy

Hi, Our windows were installed when the house was built in 1997 and I am looking for the rubber and felt piece that is on the bottom of the window to keep any air our. The model is a series 2000SH DH-R30/35 Thanks, Steve

we have double hung certainteed windows purchased in 1994. The bottom sash has a rubber weather strip on its bottom edge that rests on window sill that has shrunk and needs replaced .The window itself has the marking AVC92. do you have this part?

looking to see if you have the vinyl insert with the rubber gasket for GRW. Quite old over 35 years old. If you do have them,I will email you the size and number of strips needed. It is not the felt stripping. I believe I have to loosen about 6-8 screws in the frame to slide this in. thanks den ... (cont.)

This small insulation strip fits in a track between the up and down window. The insert to the window track us 1/4 inch wide with two grooved flanges.The bubble compressed but looks like it was 1/4 inch or less.Images are above Do you have a replacement insulation strip please send part numberPs I'll ... (cont.)

We can't find an exact match on your site.? The .270. 58-171 and the .187. 58-182 look similar, but where they fit into the top of the window, it looks like a different fit -- only one side sticks out ( on ours, both sides protrude) and the part that sticks out is different. Our piece matches the ... (cont.)

Please see the attached photos. The seal on the side of the door frame is about 3/4" wide and the kerf is 1/4". I also need the bottom threshold. I think this is an old Ademco atrium style door. Thanks for your help!

Looking for replacement pile weatherseal (double pile?) which was attached into a channel on the screens of my house. I had them rescreened this year and the local hardware doesn't do the pile. The company I purchased the windows from (sales and installation) gave me your info for replacement weat ... (cont.)

Can your part # 58-014 be used for a hindged shower door sweep? Will the moisture be to much for this item ?

Hi ... I'm looking to replace the weatherstripping for an entry door. It looks similar to the Anderson Bubble Seal, but not quite. Any thoughts on what this is or what might work as a replacement? Thank you!

3/16 round bead 3/16 flat rigid vinyl base

We need stripping to replace a deteriorated one for a weather shield door jam. Window tag is WS TGCC (R) CBA 03 IGMAC WS MED Weather shield says they do not have replacement stripping. I have posted 3 pictures. Please respond as quickly as you can. Thanks, Gordon

Can you tell me if you have the correct product to replace the pile weatherstripping for Pella Sliding Glass door? The doors were installed in 2018. Thank you!

Hi, trying to find replacement weather stripping on this inner edge of a Pella sliding door