double side load carrier fix to window

Hello,

We do not have explicit instructions on this exact coil balance system, but I'm going to have one of our senior experts take a look and see if they could provide some guidance. We'll reach out as soon as more information is available. Thank you!

First, you'll attach the 15-222 sash guide base on the top corners of the sash. Next, rotate the coil spring S145-5 into the spring slot on the track tab, facing up. Then you'll place the 15-102 side load carrier over the spring. The lowest pocket must always be used first.

We suggest using caution for the next step! With both hands, apply outward pressure to hold the carrier firmly against the jamb. Then, extend the carrier with the spring assembly facing downward. When the sash lock is in alignment with the lock slot in the jamb, press the sash lock into the slot so that it's flush with the carrier. 

Repeat this process on the opposite side before loading the sash into the carriers. Then, slide the 15-223 sash cover over the 15-222 base. Apply slight downward pressure to the sash and unlock the 15-102 carrier from jamb. We hope this helps!