Viewing all customer Discussions for:

40-111 36" Door Sweep

Metal door sweep is black and is 33" long and with a single rubber that is 1/2 and with a little curve which is 1/2" open this metal part has 6 holes for screws and they are about 6" in distance from one to the other. Anyhting like this ir very similar? If they are longer we can cut them. We need ... (cont.)

Hello, We have an all rubber weather strip attached to our storm door. It is old and needs replacing. It's just a flat piece of rubber that is just over 1.5 inches wide and is about 34.5 inches long. I did not see anything on your website that might work as a substitute. Do you have any ideas/sugge ... (cont.)

Heavy 4 foot wide sliding glass patio door, need new rollers and the weather stripping that fits into channel. Existing rollers are nylon wheels 1 1/4" diameter, width of housing 9/16", height of housing 1 1/8", installation holes 5 3/4". Thanks!

Do you have a new handle/ latch mechanism? Do you carry the screen for summer use to replace storm window? Also the gold colored door sweeper assembly.

Good day I am seeking a replacement door sweep for an unknown brand door. I have contacted Larson and Anderson without success. There are no longer any labels on the door frame. The door is about 30 yr old Dimensions: height 79"width 35 1/4" Door thicknesses 1 1/4". Sweep is 3/4 wide with 2 bottom e ... (cont.)

I sent the before and after pictures. I think we need something adjustable. Please let me know what you think. The whole piece was a gold metal that screwed into the back of the door. Thanks.

The weatherstripping is 1/8th inch wide that fits in the track, and 1/2 inch long. It doesn't entirely cover the gap in all places so drafts come in around the strips. It feels like a rubber piece and I would like your help in getting a better seal. Thanks very much.

I need to order the vinyl sweep for my expander. The door model directions is for a Cole Sewell model 1430, 1530, or 2100. The only other number found on the door's frame is 34915091 151150604.

I have a 36" wide by 1.5" thick front door manufactured by KC door. Do you carry a replacement door sweep for this door?Thank you,David

I can't find the brand listed on the door. The stripping itself extends about 1/2". below the channel. The channel is about 1/8" thick. The total length of the stripping (door width) is 36". The three screws holding the channel onto the door are spaced 14" apart. I am also open to more effective wea ... (cont.)

Our rubber sweep piece for our easy vent storm /screen doors rubber had worn off. How do I purchase a new rubber sweep and replace the old broken one are do I have to replace the whole bottom piece. We bought in 10/27/07. George

Hi, do you have a sweep like this one? Thanks. Jerry Frost Nominal 1/2" high.

Hi, I needed 2 36" door bottom vinyl inserts for this approximately 1/4" x 1/4" aluminum channel. Thank you for your help.

58-162 - The 1/8" should be 3/32, and the 7/16" is 1/2". His is shaped just like that. There's a little piece where the 3/32" is.

I'm looking to replace both the astragal weatherstripping and the door sweeps on both French doors. The previous owner didn't weatherstrip properly and/or hadn't replaced them. There's a large enough gap when the doors are closed that you can see sunlight coming through and lets bugs in. In one ph ... (cont.)

The rubber fins are broken. Need a new set of fins that will slide into the bottom channel of the door sweep. 3/4" wide

About 34 3/8" long and the metal part of the sweep is about 1".Can you provide this or similar?Jim

I'd like to find a similar short, stout door sweep brush like that depicted in the photo(s) attached.

I am needing the bottom door sweep. Cole Sewell. Solid Saver Registration number is SS 827595

I need the piece that holds the sweep