Viewing all customer Discussions for:

39-156 Caradco Window Crank, 9-1/2"

Can you help me identify this window operator from an M & W window made around 1996. It opens to the right as you are looking at it from the inside of the house.

I need all handle part

need to replace my Right hand dual arm operator. The measurements I have are as follows: Mechanism is 5 1/8" X 2 1/4" Short arm is 3 3/4" (it has 20755 stamped on it) Long arm is 8" Please advse product code. Thanks Steve

Also labeled as entry guard truth Can I get just a replacement clip to hold the pinion shaft in? Or do I need to order the whole assembly?

Looking for the casement window operator

The # on the crank is 30636. It is for the left. Please help identify. Thank you.

The handle that opens and closes the retractable window is broken. The Marvin handle is 5.5 inches long. We are looking to replace the handle with a non-broken one. Please let us know if you can find the handle for one and if you can what the price would be. Thanks

i need three entry gard-truth crank operators with linkage arm which measures 3 and 3/4 inches in length with truth entry gard detach clip attached to linkage arm. the long arm measures 9 1/2 inches. The long arm measures 10 1/2 inches from middle screw whole on middle of base plate. I need three ga ... (cont.)

Window crank L30841---20755 Brass Lock latch ( R ) Inside #7746 R----On locking arm 2R( Brown) Pricing please

window crank, name on it is Entry Gard Truth the numbers found on it are 20755 and 4538A

I ordered several EntryGard 39-032 and 39-031 dual Arm operators to replace my existing. When I went to replace one I noticed the shorter arm was longer than the existing, resulting in it hitting the track when closing. I thought I could compensate for this by moving the track about 3/4". When I tri ... (cont.)

I need to replace a 9.5 inch Caradco window crank. Just want to make sure I order the right replacement item. Mine is a 9.5 inch arm (part #40754) The part that attaches to the window is part #20755 Thanks, Brian

I need to purchase a replacement for an EntryGard Truth casement window crank. There are two numbers on the crank: 20755,30842R As you face the window from the interior of the house, the crank is on the left hand side and the window opens out on the right. I have attached a file with a picture ta ... (cont.)

Are these operator stainless steel? Parts : 39-155, 39-156 , 39-510, 39-509 and 39-533 Thanks Freddy

My Caradco window will let me open it, but doesn't work to crank it shut. The number on the crank operator is 20755. Does that give you enough information to identify the part or parts I need?

Id numbers on crank read 20755 on one hinge & the other 8589.they look very close to your picture of 39-156 and cover code 39107,I need 3 cranks & 1 cover. thank you Ken

I have 15 Marvin casement windows with Truth hardware and 12 don't work. These windows were installed by the previous owner so they are probably around 25 years old. I figured I'd start with two of them that are the same size, see how that goes and order more parts later. I watched your installation ... (cont.)

I've already ordered the handles for 2 windows without realizing I needed to replace the crank mechanism. Here are the pictures I took. Currently we're not living in the house. I didn't have pen & paper to write down numbers. Thought my picture would show it, but it didn't. I can get them later ... (cont.)

Looks to be manufactured by TRUTH. Has multiple number stampings. Gear area - 40471. Short arm - 20755 and 3084IL. Long arm stamped "Entry Gard".

We are hoping we will be able to fix/replace the hardware on our casement windows rather than replace them. I believe it has been several years since most have been opened and now, to make matters worse, some may be painted shut. I am unable today to try too hard as it is only 20 degrees. But the na ... (cont.)