Viewing all customer Discussions for:

39-156 Caradco Window Crank, 9-1/2"

I am in need of the operator (see picture above) for the Caradco Casement window Entry Guard Truth. I need one left and one right. Do you have this part?

The bolt in the picture enclosed is broken in the window Crank , do we need to change the whole crank mechanism or just this part? If so, inform the part number for the bolt or the whole crank mechanism Also let us know if there is a company that installs these cranks in Southampton, Pennsylvania ... (cont.)

My mom thinks these are Crestline windows installed in new construction in 1994, little thin retaining ring, a bushing & a locking ring for the cover perhaps She tried closing the window and the crankscrew backed all the way out of the mechanism and popped the case off. In the close-up of the trea ... (cont.)

See attachment of broken operator please. Brought home one from HomeDepot but discovered the clip (top) w/o a # on it was 4 7/16 in.long versus mine at 3 13/16 in. (mine has the 20755 on the short arm) So unscrewed all & took operator back; & discovered online that majority I found were too long a ... (cont.)

Hello I wrote earlier trying to identify a window crank unit I need to replace. As I understand it, it is out of production. I received a reply to a post I made earlier asking for additional photos. My tenant has provided the following but I believe she has missed the arm. It opens and closes li ... (cont.)

I'm trying to find replacement hardware for 2 casement windows. The old mechanism's say Entry Guard and shows # 30744 on the arm. Can you ID from this? Please advise. Thank you, Tom

The gears on my cranks on some of my windows are worn out. Need new crank/operators. The plate for the operator says "Truth" Small control arm has # 20755

Hi I got a used window that did not have any covers or cranks . The operator says truth entryguard hope the pictures help. I think I got all the numbers in them. I just need one right hand crank and cover ,and one left hand, crank and cover thank you Ed

Numbers on the part: 20755, 30842R, 40471, pat. #1982

I have a broken operator on a Caradco casement window. The operator's single arm is stamped Truth 3075. Can you help find a replacement operator?

This is for a Lincoln window. The number stamped on the back of the arm is RH30472. Truth Entry Guard 4047 stamped on base and 30850 stamped on the smaller arm.

20755 on the top bar and 06N3 or 06N8 on the lower bar. Need the entire hardware set as the crank screw is stripped. I can open the window, but I can't close using the crank.

I have multiple crank gear issues. I think the window will open if the gears could be fixed. Can I just ordered gear parts and make it work again. I have 4 windows with this problem. Also missing covers and some crank handles.

Caradco window. I sent pic of left inside operating. I sent pic of Right inside crank mechanism. The crank mechanism that the inside lever/handle attaches to will screw itself out to the inside as it appears to be broken where it attaches to the mechanism under the wood that hte screen sets in ... (cont.)

I have cardaco crank out window in kitchen, these covers look like they would fit ?

Are the cranks for these window interchangeable, both for left and right opening windows?

Two LH window cranks are apparently stripped and need replacement. Obviously, this photo is of the RH side that works. On the mechanism, the name WindowGard Truth and the number 20755 is stamped. Thank you.

One of the Caradco window operators in my condo does not open the window when cranked unless the closed window is started to open by manually pushing it. There seem to be too much play in the crank rotation. The arms of the opening mechanism are marked "EntryGuard" and "20755". the Caradco name is ... (cont.)

Hi, I have a number of Caradco casement windows in my home that were installed in 1986. A couple of them have experienced mechanical/operator/crank failures while still maintaining a good weather seal, no warping or rotting and sealed double glass. I would like to fix the mechanical problems if poss ... (cont.)

Hi. I'm trying to replace some broken window operators. I ordered the EntryGard Dual Arm Operator 39-031, but the armature was too long. I've uploaded a picture of the original operator and the new one side by side. Could you tell me the correct part number that I need? I am also needing to order th ... (cont.)