Viewing all customer Discussions for:

39-156 Caradco Window Crank, 9-1/2"

Need a replacement operator for a Caradco casement window. Standing inside the house and facing the window, the hinge is on the left. Overall dimensions of the casement window is 22 !/2" wide x 46" high. Exposed glass area is 17 7/8" wide x 41 78" high. Markings on the arms of the operator mecha ... (cont.)

Hi, We are looking for replacement parts for a Caradco window in our bathroom. The number on the crank mechanism is 20755. There is no number on the interior plate. See attached pictures. Can you help? Thank you! Kathleen

Dear Swisco Experts, I'm repainting the casings and frames for my existing window. I'd like to replace the cranks, mechanism covers, and window locking mechanisms with white ones. The crank mechanism cover says Caradco on it above the crank hole. The locking mechanism has 2 3/8" spacing betwe ... (cont.)

Has the following on top of carrier: Truth, Entry Guard 20755 Window sash is 18 1/2 inches. Photo is of window opening to left from inside, but I need one opening to right. That one is inaccessible for photos until I get ready to replace.

Which part are you measuring at 9 1/2 inches? Part # 39-155

I am in need of the operator (see picture above) for the Caradco Casement window Entry Guard Truth. I need one left and one right. Do you have this part?

The bolt in the picture enclosed is broken in the window Crank , do we need to change the whole crank mechanism or just this part? If so, inform the part number for the bolt or the whole crank mechanism Also let us know if there is a company that installs these cranks in Southampton, Pennsylvania ... (cont.)

My mom thinks these are Crestline windows installed in new construction in 1994, little thin retaining ring, a bushing & a locking ring for the cover perhaps She tried closing the window and the crankscrew backed all the way out of the mechanism and popped the case off. In the close-up of the trea ... (cont.)

See attachment of broken operator please. Brought home one from HomeDepot but discovered the clip (top) w/o a # on it was 4 7/16 in.long versus mine at 3 13/16 in. (mine has the 20755 on the short arm) So unscrewed all & took operator back; & discovered online that majority I found were too long a ... (cont.)

Hello I wrote earlier trying to identify a window crank unit I need to replace. As I understand it, it is out of production. I received a reply to a post I made earlier asking for additional photos. My tenant has provided the following but I believe she has missed the arm. It opens and closes li ... (cont.)

I'm trying to find replacement hardware for 2 casement windows. The old mechanism's say Entry Guard and shows # 30744 on the arm. Can you ID from this? Please advise. Thank you, Tom

The gears on my cranks on some of my windows are worn out. Need new crank/operators. The plate for the operator says "Truth" Small control arm has # 20755

Hi I got a used window that did not have any covers or cranks . The operator says truth entryguard hope the pictures help. I think I got all the numbers in them. I just need one right hand crank and cover ,and one left hand, crank and cover thank you Ed

Numbers on the part: 20755, 30842R, 40471, pat. #1982

I have a broken operator on a Caradco casement window. The operator's single arm is stamped Truth 3075. Can you help find a replacement operator?

This is for a Lincoln window. The number stamped on the back of the arm is RH30472. Truth Entry Guard 4047 stamped on base and 30850 stamped on the smaller arm.

20755 on the top bar and 06N3 or 06N8 on the lower bar. Need the entire hardware set as the crank screw is stripped. I can open the window, but I can't close using the crank.

I have multiple crank gear issues. I think the window will open if the gears could be fixed. Can I just ordered gear parts and make it work again. I have 4 windows with this problem. Also missing covers and some crank handles.

Caradco window. I sent pic of left inside operating. I sent pic of Right inside crank mechanism. The crank mechanism that the inside lever/handle attaches to will screw itself out to the inside as it appears to be broken where it attaches to the mechanism under the wood that hte screen sets in ... (cont.)

I have cardaco crank out window in kitchen, these covers look like they would fit ?