Viewing all customer Discussions for:

39-156 Caradco Window Crank, 9-1/2"

need both parts 39-156 and 39-155. do I need to order the other parts separate or do you sell kits?

The only number on the piece that I can find is 31538. Does this help. Please let me know if you have a replacement for this crank mechanism. Thanks, Pat

We have several windows our Church that use part no. 39-155 or 39-156. A couple have the wood trim that goes over those operators broken and in need of replacement. Any ideas?

Can you please locate this truth arm swing gear and hand crank for me? Winter is coming, I need to locate it fast. Can you get back to me please ASAP RUSH? Gabriella

I recently ordered a dual arm operator from you and received it just fine. 39-032 I attempted to replace the broken one and discovered the shorter of the 2 arms is longer than the original so it will not work. I am less interested in a return as I am in just getting the right product. Th ... (cont.)

Hello, I have at least six Pella wood casement windows where the crank-handle has separated from the main body (see attached photo). I have identified part #'s: 40754 (main gear body and 9" arm assy) 40754 is also attached to (3) linked pieces: 31538 (3" short arm in S curve), attached to ... (cont.)

Hello, I just recieved an order that I placed with you folks for replacement window operators for Caradaco casement windows. When I look at existing screw locations and new they are recessed back so far that you cannot get to them with any tool I know of. Can you let me know how to replace these w ... (cont.)

We have all Caradco windows in our home installed in our home when we built it in 1991. Some of the knurled collars that hold the crank have become unusable, thus we can't open the windows. Are replacement parts available?

I bought a house with missing window crank openers. My neighbor has the same windows (from the same builder) and took a couple of photos showing the mechanics and the opener. I took a photo showing the location (3 holes) on the inside lower corner of the window. No information on the name of the ... (cont.)

The operator for this window needs to be replaced. It will open the window, but no longer closes it. I've removed part of the window casing to expose it for these pictures. I am reluctant to completely remove it until I have a replacement as I'm not sure what would hold the window in place. It's a ... (cont.)

MY HOUSE WAS BUILT IN 1987 WITH SOME CRANK WINDOWS. 3 OF THE CRANKS HAVE PULLED OUT OF THE UNIT WHEN CLOSING. IS IT NECESSARY TO REPLACE THE WHOLE CRANK UNIT? 2 HINGE ON THE LEFT, 1 HINGES ON THE RIGHT. THANKS FOR YOUR HELP. SUSAN

Hi, I have a window with a Dashwood window crank. The number on the arm of the crank shows 20755. When I enter this number into your system it shows your part number as 39-155. Is this correct. Also, I'm not clear on the charges at the Canadian border. Would you have an idea what the ground sh ... (cont.)

Good Morning: Attached please find photographs of a broken window crank. The only identify marks are the numbers on the window hinge and MW on the plastic crank cover. The end of the spiral crank has broken off and I cannot close the window with the crank.

I am replacing a 39-156 crank in my home. The 4 mounting screws are under bottom moulding and hard to extract. Can i pry this moulding off and replace it after i get the crank installed ? or should i use special scrwedriver ? thanks

Part # 30748 along with 10" attached to window frame see images.

I'm looking for the following. Can you assist? Thank you Jim

Hi I have a number of windows that the crank to open the window no longer opens the window. Entryguard truth is stamped on the longer of the two arms. the longer arm is 9.5 inches and the shorter hinged am is 3 13/16 of an inch. I believe your product 39-155 and 39-156 seems to match the dimensions. ... (cont.)

I have three window operators that need replacement and, while the 39-155 and 39-156 appear to be close, they are not exact in appearance or measurement. I have attached photos of my operator. The measurements for this operator (in using your diagram for 39-156 as a guide) are as follows: From ... (cont.)

Hi Swisco. I have several casement windows with failed crank mechanisms. Most of them are a brand I don't recognize, with a "K/K" logo near the handle. (See attached photo.) They are wood windows. I also have several Andersen windows needing new assemblies. One is wood, the others are viny ... (cont.)

I have to replace the window crank for one of my Caradco casement windows and figure the other 3 windows are not in great shape either so I may as well have them all done at once. Thanks to your site I was able to identify the cranks for the kitchen windows, I believe they are 39-155 and 39-156 but ... (cont.)