Viewing all customer Discussions for:

39-176 Sash Crank Operator, Pella

Hi, My name hunter, My customers need replace or repair over 40 casement window slit arm operator like the picture, do you have this pairs or any replacement . Thanks

Not sure of the window brand. The shaft is 7/8 inches long. 3/8 inch splines. Haven't seen a handle that fits the shaft with 3 splines.

Not sure if you have one of these thanks

In the pic the crank assembly is broken so at the critical moment where the lip on the window side is supposed to get grabbed by the 'claw' on the sash side misses so the window no longer closes. i need to find a suitable replacement.

Hello! 1992 Pella crank out window mechanism is broken ? - do you have a good replacement? Thanks for your help! Kathy

I need help finding attached window hardware

Help

I need 5 left-opening and 4 right-opening sets! They could not find any markings, numbers, or names...

Our wonderful Pella windows with

Not sure what this is called but all of it needs to be replaced

I have three Pella casement operators that still "operate", I.e. smoothly move the window, but no longer move the window into the final closed and "weather sealed" position.

There are no markings that I can see. The windows are 48 years old and I THINK they are Pella but not sure. I need 1 left open and 2 right open. I also need 3 window cranks ..... gold/ copper not white. thank you

I'm looking for replacement hardware. Might be: Pella Roto Operator, 1967 to 1993, CC / WC-Right Hand Pella Roto Operator, 1967 to 1993, CC / WC-Left Hand

I need a window crank for old wooden window

Looking for this small brown piece in the bottom corner of the window. It keeps the corner of the window up and in place and sliding smoothly with the shoe hinge but doesn't look like it's attached to the hinge.

This is a Pella window. You have a replacement crank?

Once the window is open it needs help to close and close and lock. I'm not sure what parts are needed. The windows are Pella

This Pella Casement window does not close properly. Does not hook on to lock. Crank mechanism is broken and missing the arms that connect it to window. No closure, except by hand on the inside of house. Up too high to close from outside. This window is lacking an upper lock as well. Thank you fi ... (cont.)

I'm looking to replace this with a foldable crank handle. Also need new operators for similar windows. These are ~30yo Pella's. Thanks

I have a broken casement window operator. The only ID on the window is stamped on the sill track & is R 902 WC. This is an egress window and the dimensions are greater than the operator I've seen on this site. Photos follow - Thanks in advance if you can be of help.