Viewing all customer Discussions for:

39-176 Sash Crank Operator, Pella

Ineed the mechanism to replace this part on my window. I also need the hanles to turn open and close the window, along with the left and right latches to unlock the window

Hi I would to rebuild 2 casement windows, a left and a right. The gears stripped . These are about 40 years. I have about 40 in my house so ill see if can rebuild 2 first. In white. Can you give me a parts order. Thanks tom hogan

Need the replacement for this operator. I thought it was 39-096 but the two screws to the window bracket are 2 inches apart, instead of 1 5/8 in your catalog photo. Any help to get the correct replacement part would be a.godsend.

Good Afternoon, I am from Big Rapids Public Schools in Big Rapids MI. We are looking for vintage Pella Window Crank Assembly and Lock Assembly with 1 lock and 2 hooks. The pictures have been attached. Thank you.

I have a problem at the moment of closing the window almost at the end of the closing proses and set the lock position inside. To be able to close the window, we have to push window from outside and then lock the window.

I need to replace the entire hardware on this old window. It opens on the left but the hinges are on the right (looking out the window). The handles keep getting stripped. I can only find a marking on the handle cover plate it says 4 LH; and then another under one of the arms that looks like a WL. ... (cont.)

I need the part between the articulated arm and the gear on the crank. As is now the crank rotates non stop without opening or closing the window. The window moves freely when manually pushed in or out. The part was broken by a gust of wind while having the window in the open position, so I don't fo ... (cont.)

I need several of these operators.

Hi there, I’m reaching out to check whether you carry or can identify the casement operator handle and casing shown in the attached photos. Could you please let me know if you have these exact parts available, or if there is a compatible replacement you would recommend? If you need any additio ... (cont.)

the single swing arm in the first photo, the crank is present. The crank arm is present. It's the swing arm or the single straight arm that we're trying to find

Hi Swisco, I am looking for white Folding Cranks and Lock Lever replacements for my Pella windows.

I hope these pictures are sufficient. We need to point out that we have two different ways the windows open. One opens from left to right and the other right to left. Essentially, what we have is that the cranks and the stubs that that the cranks fit over to open the window are both stripped. We als ... (cont.)

I am in need of replacement parts for two Pella Casement windows circa 1980's. The windows are 27" X 51"and have removable storms. They are part of a bay window with one opening to the right and one opening to the left. Any help in finding propper replacement pieces will be greatly appreciated.Tha ... (cont.)

The arm that connects to the actual crank has busted. The extending arm is approximately 10" long and the smaller part approximately 5-6". It appears the part connected to the actual crank mechanism broke off. THIS IS TIME SENSITIVE AS THE PRIOR TENANT DID NOT ALERT US AND THE NEW MOVE IN HAS OCC ... (cont.)

I would like to replace operator that opens left from outside and to the right when viewed from inside.

Looking for a replacement item

Hello, I have 39-40 year old Pella casement windows. Two of them dont want to close once opened. They dont open great but they do operate that all until you go to get the last crank or two to get it to the lock and it dosent want to come all the way back into the lock.

House built in 1983. Pella old-style casement windows.

Hello I'm looking for the operator/opener for a Pella 809 casement series. From the interior it's the right side that opens the window like a vertical door from the middle, swinging out to the right. The pics above are of the left side. I need the right side

Please let me know how can I replace the handle opener for this casement. I don't want the original handle that sticks out. Any recommendations of which I can replace it with. Thank you in advance for your services. Nina