Viewing all customer Discussions for:

55-006 3' Capitol Snap-in

Hello! I am trying to replace some snap in strips and wanted to see if the following part numbers made sense. I only have a tape measure and getting down to the exact 16th of an inch is kind of tough. 55-194-6 This is for some bigger windows. The measurements I have are 9/16 height, ... (cont.)

I want to replace this 1/8" thick glass with a 5/16" glass assembly from Glass Apps. The current window glazing appears to have a quarter circle measurement that could be reduced by 3/16" to accommodate the thicker glass, but I don't know what I need to give someone to find a new, thinner glazing. ... (cont.)

I want to confirm the correct part number to order vinyl part is 5/16" tall x 1/2" wide including the small tab curved edge has no tab

Don't know what to post. It's an grey vinyl glazing stop. Have called several glazing company's and nobody carry. Can you tell me who carry that type of glazing stop? Pictures attached

I am looking for replacement snap on vinyl glazing beads for our 1959 home in Austin, TX. The windows are single pane aluminum. If this beading is no longer available, is there something close which might work? As you look at the photo of the existing vinyl glazing bead, the left straight side is ... (cont.)

see attached photos of existing bead. need replacement

I need a length of this type snap in glazing for my mobile home. Thanks.

I need 4 sets of top and bottom glides as well as the rivets and possibly a rivet tool. I believe the parts are #19-004/15-002 from the pictures on your website. The channel is 39/64" square. and has a number that looks like 28302 on the side. Maybe that is 2830? Would you happen to know where I ... (cont.)

where to buy

Hi im trying to replace 5 missing snap in glazing strips on a home built in 1964. The pieces are 10 inches in length as they are part of a french style window.. the snap in i bought a the hardware store.. were a fail!! I didnt realize how exact they needed to be DUH!!!! One thing i noticed ... (cont.)

I need replacement glazing strips for some hail-damaged church windows. I am enclosing photos showing the measurements and cross section. Your part number 55-30-6 is close, but my strips appear to be 5/16 wide, while your part number measures 3/8 inches. Are strips 5/16 x 1/2 inches available? ... (cont.)

I have a house built in 1982 with aluminum windows using the pictured snap in glazing. Do you have it in bronze or black? Not sure of the brand of windows. The window unit is single glaze with 9 - 11x15 inch panes one of which is busted out. The snap in glazing shown is 1/2" wide by 1/4" deep. ... (cont.)

Without being able to find any snap-in glazing locally, I've installed the replacement window glass using silicone. Should I scrape out the silicone and use the snap-in, or just cut the lip off the snap-in glazing and silicone it on (just for looks) ?

I am trying to find some glazing and would like for you to help identify this please. I will be buying from you if you have it. from lip to edge of is 1/2 inch and .375 from flat ridge lip to edge of top round.

Looking for black snap in glazing for old aluminum windows. The edge next to the window is about 1/4 inch. The rounded side seems about 1/2 inch and the open gap between edges seems to be around 1/4 in. Do you have this available for me to order online? If so can you provide me with the detail. ... (cont.)

Hi Do you have a beading to match this? Or something close that will work? Thank you John

I need to get some Snap-in Glazing Beads that will work with my window panes. Here is one of my old ones.

I

Looking for a replacement for this type of window glazing. Hoping you can help please

I replaced the top snap in going across my windows horizontally. It appears that after a week in the Texas heat and sun, the corners pop loose. What do you recommend I use to secure the snap in's so it does not continue to pop out on each end?