Viewing all customer Discussions for:

55-080 3' Snap-in

I'm looking for replacement glazing bead as shown on picture, either black or gray.

Need help identifying this glazing bead. Possibly for an ALenco window.

These glazing strips are fairly rigid plastic with a roughly 3/4 inch side that runs beside the IGU and into a slot in the sash. The IGU is 7/16ths. There is a rigde on the inside and on the outside of the 3/4 inch side. The other side is approximately 1/2 inch and flat with no ridges. The 1/2 i ... (cont.)

Looking for this black glazing beads for bronze sliding aluminum windows

Ply Gem 1100 series single hung

Approx 11/16" x 11/16"

Hi, i am looking for something that is similar to this i can't find my window manufacture on my windows.

Do you carry any vinyl glazing bead for the defunct window manufacturer CareFree?

glass bead for aluminum windows very old the bead is 7/16 on face and 3/8 at the side that goes next to the glass and frame.

What is the strip called so I can buy one to put back on my window the sun has dry rotted that part and now it has fallen off

Vinyl windows from mid 2000s

I am looking for new vinyl window glazing for milgard mil-027-5. Series 1110/1180/1280

These pix and dimensions are from window weatherstripping/bead for an MW top-hinge push-out window. Similar to your 55-080, but some key differences. Any suggestions?

Trying to find the replacement glazing strip for aluminum champion windows. Each leg is 1/2 inch long. Thank you

can't find proper part for my aluminum windows.

I'm looking for snap in glazing to go on wood sash with thermal pane glass it measures1/2" on the top that sits on the glass and 7/8"leg that inserts in the groove between the sash and the glass there are also splines running along the bottom of the long leg that clench it into the groove.Any help w ... (cont.)

Please help me identify my snap in glaze. I think it most looks like 55-165. Overall dimensions are the same as 55-165 however the tab is at 3/8" from the end and seems much shorter than the one pictured. The manufacturer of the window was Jamco and the glass is IUG 1/2" thick.

Wondering if you have a close match for this on the website I think 55 080 looked pretty close

Trying to find this glazing bead or an alternative that may work. Color is tan. 3/4" wide with j hook on one side

These are pieces of a plastic window glaze beads that need replacement but no one in my area can identify them let alone stock them. Please let me know whether there is a appropriate part that can be used. I think the part I have pictured may be somewhat deformed due to heat and weather over the yea ... (cont.)