Viewing all customer Discussions for:

55-090 6' Capitol Glazing

Hoping you can identify this glass stop

Hello. I wanted to see if you have such a spare part.

This is a casement window with a two part snap in glazing. However, the top piece does not seem particularly necessary; at least in this application. The client believes the brand to be Star Windows. There were no visible markings on the frame, sash, or hardware - other than the hinge which was Trut ... (cont.)

Hello, hoping you can help identify this glass stop or something that will work. Thanks!!

Looking for replacement bronze glazing for 1986 Lincoln casement windows. do you have a replacement that will work? John

Looking for glazing bead I don't know the window manufacturer name

2. slider 3. single hung, latch has some sort of spring in it? 6. unknown latch but may match one of the other ones I've uploaded 7. this is #3 cleaned up

This is from a 30 year old Norco window. It has a three sixteenth ribbed tongue. The over all width is about three quarters of an inch. The one that I have is tan but white will work too.Just wondering if you might have something that could work.

Hello, hoping you can identify this glass stop.

Hello There, I am reaching out to see if you supply the photo's I have attached for glass stops? If you need more photos please let me know. Thank you Shauna

Looking for this glass stop - width is approx. 15/16".

I'm looking to match the vinyl glazing bead per the attached photos. Please let me know if you have this profile, if not, can you suggest an alternative?

The piece I am looking for is a retainer strip for a thermal glass unit in an aluminum frame. It is about 3/4" wide, plastic.

I have an aluminum Alenco bathroom window, which was installed when I built my home in 1990. The existing bronze glazing beads are 1/2" wide. I've just had the glass replaced with frosted glass. Can you provide me a bronze glazing bead, which is greater than 1/2" wide, maybe 3/4" or 1" wide? Thanks ... (cont.)

Hi folks, I bought a few pieces of the Capitol Gazing bead (55-090), with the hope it would fit the windows on a recently purchased home (built in 1972). Even when they're really close in profile, they're a bit wider and will not fit. I'm attaching photos of both a new (black) and an old (whiti ... (cont.)

Windows were supplied installed on a 1990 RV (Park Model) orphaned by Sierra. After 26 years, sun has significantly dried out the part on the glass (not the insert) on a multitude of edges. I have inquired of numerous sources and been unable to identify a source for replacement of the glaze. If ... (cont.)

These are glazing and retaining strips off my circa 1986 aluminum frame double glazed horizontal slider windows. A big one on the west facing wall is deteriorating and needs fixing. I found the name Linford and 1985 etched into the spacer between the panes of glass if that helps. ... (cont.)

Hi I'm hoping you may be able to identify a vinyl glazing bead that I'm having trouble locating. I need one piece at least 40" long. Thanks!

This is a vinyl glazing I am trying to find a match or something comparable. The width is approx. .500" and the thickness is approx. .150" I will need 4 6ft lengths and 4 3ft lengths I have not found a match on the Swisco site all the ones closest to this on the site are wider than .5" This would be ... (cont.)

this is a flat glazing bead @ 5/8" wide maybe 1/8" thick with a 3/16 notched edge Looking for price on 20 lineal ft color same as image beige/sand