Viewing all customer Discussions for:

55-156 3' Wenco Snap-in

do you have a window glazing bead, 65?90

Hi. I am trying to figure out what I need to replace this vinyl glazing that is cracking and breaking. This glazing is for a exterior non-opening window that is 5/8" thick.

Replacing IGU in older wooden window lower sash and the glazing trim strips did not like being removed. Looking for replacements. The strip is a 90 degree type with 3/4" by 1/2" wide sides. two small ridge strips to lock it in to frame. I'll upload pics if see where to attach it. ... (cont.)

Looking for snap-in vinyl glazing bead for a Hurd window. I saw https://www.swisco.com/6-Hurd-Rivco/pd/Snap-in-Glazing/55-175 but this seemed to be about 1/4" taller than what I have. The height is 7/8". Width is 9/16".

Trying to find right style any help would be great.

I have several windows that need work and trying to locate some replacement glazing parts. I have looked on your site and can not find any. Can you help me out? Chuck

Can you tell me the required slot width for this 55-156 glazing bead? Thanks

These photos are of another window on my house, not the actual one, due to not being able to get on roof. I need approx 72 " of the vinyl beading. Hope this helps! These windows seem to be Anderson, made in 1979. The window I need the beading for measures approx 45" x 28"Thank you William ... (cont.)

Hey Folks,Replacing lots of foggy windows, and I was hoping you could identify and sell me the pictured glazing bead. I looked at all of your brands....and I see a couple that might work. Hoping you can find a real replacement, or recommend a good substitute.THANK YOU!!!!Scott

No idea on the window manufacturer. Any help identifying would be great.

3/8" wide at it's widest part,1/4" tall. White. Window frames are wood.

I'm getting ready to pull glass off of bay window due to the bottom support stool being rotted. I have not pulled out the existing glazing. I do know that the glazing exterior flange is measuring about 13/16"in width. It appears that this is an L-shaped glazing because I did pry out a little piece, ... (cont.)

Hey Swisco, Do you guys have this part? Please see pics. Thanks Shane

Need snap in glazing for window in white color.

I have 14 windows I need the glazing replaced. I am not a big fan of these but I am looking for someone to do it for me if its not to costly. or I will watch a few windows and determine if I can try it myself... I normally can do things BUT this glass deal kinda scares me. I live in 77354 zip code? ... (cont.)

These pix and dimensions are from window weatherstripping/bead for an MW top-hinge push-out window. Similar to your 55-080, but some key differences. Any suggestions?

can't find proper part for my aluminum windows.

I'm looking for snap in glazing to go on wood sash with thermal pane glass it measures1/2" on the top that sits on the glass and 7/8"leg that inserts in the groove between the sash and the glass there are also splines running along the bottom of the long leg that clench it into the groove.Any help w ... (cont.)

Please help me identify my snap in glaze. I think it most looks like 55-165. Overall dimensions are the same as 55-165 however the tab is at 3/8" from the end and seems much shorter than the one pictured. The manufacturer of the window was Jamco and the glass is IUG 1/2" thick.

Looking for replacement - do you have something that matches?