Viewing all customer Discussions for:

58-053 25ft Kerf Mount Bubble Seal, 5/16"

I'm looking to find a replacement piece for my wood windows. Please help.

We just moved into an a home that was built around 1990. The house has wood casement windows

bulb weatherstripping for pella casement

30 year old Weathershield casement windows. Need to replace weatherstripping. Ann

Hi, The push in bulb that i have is too big and gets squashed when i close the door,and either comes out or rips. Please help

Can you please identify the seal in the attached picture showing a cross section of the seal. I will need a reel of the stuff to cover many windows. I did not find any marking on the window to help identify the manufacturer. Thanks

I need to replace the weather stripe on 25+ some years old Casement windows, do you thing 58-053 product would be the right item for my case? I have included the pictures showing the current weather strip and its measurement. Thanks

Patio door purchased around 1990; no serial numbers or markers on it. The vertical weather seal between the sliding door and fixed door needs replacement. It fits into a retention slot on the fixed wood door. Am looking for original replacement if possible or similar one. Caution note is that the ... (cont.)

I do not have a model number (windows were installed prior the purchase of the house. Quite a bit of weather strips have to be replaced (bottom and between windows. Please advice the part number and the size of them.

Hello, I am looking for a replacement weather stripping for older casement windows. The original felt type of stripping can not be removed from the metal holder without force. It will not slide out. So I will need a replacement that will include replacing the metal fast. Could I use a compression ... (cont.)

Hi, I have a few Pella sliding glass doors which are about 8-10 years old. I am trying to replace sections of the weatherstripping with as close to original product as possible. It seems like the weatherstripping I have is a little bigger (3/8") than what I've found. It also looks like the bulb p ... (cont.)

The weather strips on my Kolbe windows need replacing. Do you have the replacement strips? Pictures attached. As I have indicated on a picture... There is a rigid plastic 'T'; the base of which is pressed into a groove in the window. There are two soft rubber wipers that extend from the top of the ... (cont.)

Need replacement for Wenco Window Weatherstrip

I have several LP casement windows( 1991 vintage) that need new weatherstripping. The profile is very close to the Kerf Bubble Mount Seal 5/16" (58-504) . However, I am not sure about the wall thickness on the bubble itself. Mine appears to be thinner, possibly 1/64" thick. Could you please ... (cont.)

the part i'm looking for is a weather seal that slides in a channel on the lower edge of a vinyl replacement window - it appears to be a semi rigid rubber or plastic, sits at the outside edge of the sash, silhouette is round with a small lip at the bottom, like a Q.

What are the minimum/maximum design clearances for the 58-053 bubble seal? And is the 58-055 also made from Santoprene?

Hi, could you tell me the part numbers of the following items. Thanks Arturo

We built a new home 2002. We put Kolbe double hung windows in. We need to replace the sash weather stripping. Hope you can help. Thank you, Frank

The door does not have existing stripping so I can't show you sample. There is a slot around the frame but not on the usual face but on the side of the frame. Also the slot is ~1/16" wide vs normal 1/8" slot. It is 1/4" deep. I have attached images and a sketch. Thanks Richard

this goes around a hinger patio door, can you provide part number.