Viewing all customer Discussions for:

58-053 25ft Kerf Mount Bubble Seal, 5/16"

Here's a better photo of the weather stripping in need that goes into a tight channel at the bottom of the sash. I can't seem to find one that looks like this. Any help you can give would be greatly appreciated.

Do you have a bubble seal to replace this? 5/16".

I have weather shield windows and i have the attached weatherstrip that I am not able to buy anywhere. Please help me find the similar or equivalent weather strip. Thanks, Naren

On this bubble seal, bubble is 1/4 " height and the base that slides in the grove is 3/16"

The attachment has 3 photos of a weather stripping we would like to replace. These were from Wenco windows installed in 1995. They are wood windows with aluminum clad exteriors. We have 11 double hung and 2 casement windows. Therefore we are looking to purchase a couple hundred feet. We hope yo ... (cont.)

The problem is the window sill is bowed and I need a bubble seal with a larger diameter than 5/16", possibly in the neighborhood of 9/16". The problem is that the sill has bowed in the center, thus I need the seal to work the entire width of the window sash. Your product 58-053 looks similar to wha ... (cont.)

Hi, I hoping that you can help me find replacement weather stripping for my Pozzi wood casement window and window frame. I am a DYI that usually learns by trial and error Thanks, Amy

Good Afternoon, I am trying to find some replacement weather stripping for my home windows. Not sure of the window manufacturer. The stripping fits in a groove on the bottom and top of the window. The diameter of the "Bulb" 1/4". The length of the groove portion is 6/32". I need approx 20 ft of s ... (cont.)

Hi, I have 5 Crestline sliding windows. All are marked L29303X42C4M between the panes of glass. I need to replace the weather stripping shown in the attached profile pictures. Can you help me? Thanks Kirk

I tried contacting you a few weeks back, but no response. trying this again. Please let me know what you have that might work.

hello I am looking for bulb weatherstripping for M&W windows. This weatherstripping seperates the upper and lower sashes and mounts in the side frame. See pictures. The dimensions are: bulb diameter=12/64", backing width=12/64" and overall bulb height=17/64. Thanks

Hello, Looking for replacement bubble seal for these dimensions. Do you have them in these sizes ? Thanks Patrick

my seal looks like your 58-053 except it is foam filled! The measurements are exactly the same as yours, except for the foam. I do not see an e-mail address to send a picture??

Have removed all the bulb weatherstip from our 1987 crestline casement windows. Bulb is 1/4 inch diameter, barb end is 1/4 inch long. We have 31 sashes to reseal. Found no markings on windows.

I have 10 aluminum anodized casement windows with wood veneer interiors. I don't know the brand. The only text info is in the upper insulated glass space and it says, "Low e March 10 2006" The weather strip in the photos is on the outer edge of the window. It's a press fit into a slot. The strip ... (cont.)

I have casement windows and need replacement bulb weatherstripping. The bulb and barb are 1/4 inch making for a total estimated height of 1/2 inch. I cannot tell the exact height because the bulb is somewhat compressed due to its age. The width of the barb is 1/8 inch but is also somewhat compr ... (cont.)

To: Customer care, I am looking for a seal as shown in the attached photo. It

I ordered your 58-053 5/16ths bulb weather stripping. My question is should I wrap the edge with the weather stripping, cut the edge with the end extended out past the window so it is even with vertical bulb, or simply cut the bulb even with the side of the window. The original seal was cut even ... (cont.)

Looking to replace this seal. It is all around a casement window. Guessing the kerf is 0.78" slot. Let me know what you come up with. Thanks Chris

Home is in MN. Built circa 1983 ish. Casement windows (unknown manufacturer maybe Kolbe?) that appear to have original vinyl weather stripping. I just ordered your 58-053 for the sashes. The frames have a slightly different seal design. Please see attached pictures. Note no "barbs." what do ... (cont.)