Viewing all customer Discussions for:

58-053 25ft Kerf Mount Bubble Seal, 5/16"

I have 10 aluminum anodized casement windows with wood veneer interiors. I don't know the brand. The only text info is in the upper insulated glass space and it says, "Low e March 10 2006" The weather strip in the photos is on the outer edge of the window. It's a press fit into a slot. The strip ... (cont.)

I have casement windows and need replacement bulb weatherstripping. The bulb and barb are 1/4 inch making for a total estimated height of 1/2 inch. I cannot tell the exact height because the bulb is somewhat compressed due to its age. The width of the barb is 1/8 inch but is also somewhat compr ... (cont.)

To: Customer care, I am looking for a seal as shown in the attached photo. It

I ordered your 58-053 5/16ths bulb weather stripping. My question is should I wrap the edge with the weather stripping, cut the edge with the end extended out past the window so it is even with vertical bulb, or simply cut the bulb even with the side of the window. The original seal was cut even ... (cont.)

Looking to replace this seal. It is all around a casement window. Guessing the kerf is 0.78" slot. Let me know what you come up with. Thanks Chris

Home is in MN. Built circa 1983 ish. Casement windows (unknown manufacturer maybe Kolbe?) that appear to have original vinyl weather stripping. I just ordered your 58-053 for the sashes. The frames have a slightly different seal design. Please see attached pictures. Note no "barbs." what do ... (cont.)

The closest I can find is shown in 1380 pdf.

How to installs 58-053. Bubble seal

hello, I have old Certainteed casement windows and the weather stripping is coming off all of them. i would like to replace the weather stripping. I have included a picture of the weatherstripping. it is bubble seal with 1/4" width of bubble and 1/4" length of base extension. If you could point m ... (cont.)

Hello, I have several Norco (casement) crank-out awning windows for which the weatherstripping on the frames (not the sash) has failed. I've included a photo in the hopes that you can help identify a suitable replacement material. Thank you, Tom

I have a client with casement windows who needs many of them re-weatherstripped. This is a photo of the product, do you have something like this?

This is the bubble weatherstripping at the bottom of my windows. The channel if fits in is 1/8 inch. The measuring the bubble diameter at 9/16.

We have 2 windows that are hinged on the left in which the crank is stripped. I believe the arm is 13 inches. We're also looking for a price on weatherstripping. The picture above is a little large, but we made it work. Also, we need a new lock mechanism for the same windows. Thank you! ... (cont.)

I need to replace some interior door weatherstripping.It is very similar to 58-053.The old weatherstripping doesn't have the horizontal fins like the 58-053 but just one small vertical fin.In other words there is just a fin below the bubble but nothing on the side of the fin.The old weatherstripping ... (cont.)

I need to replace the weatherstripping on my crank out casement kitchen window. I believe it is a Patriot window and was installed when the house was built in 1994. I've attached photos and the measurements I took are as follows: The base is 1/4" the "bubble" (although deformed) seems to be ... (cont.)

Bulb is about 3/16 in in diameter. Prong that goes in slot is 1/4 in long.

I am fixing up my 1986 Hurd casements crank out windows. I need to replace seal in 22 windows. Here are my sketches. Regards, Joe

I have purchased a house with 30 year old casement windows. The seal system is dry and hard and has been painted a few times. The seal system has two components to it. A bubble type strip that sits in a groove in the window frame. The opening section of the window frame would close and press aga ... (cont.)

I received the subject order of 58-055 : 9/32" Bubble Seal with angled base. I like the product very much. But, do you have the same except a bit smaller? A shorter, smaller barb with a smaller bubble?

I just ordered 58-053 5/16" bulb seal. Could you tell me what size slot cutter routing bit would I need?