Viewing all customer Discussions for:

58-055 9/32" Bubble Seal With Angled Base, 25ft

Hello Would like to ask if you have seen any weather seals like this and or if you might be able to get replacements or comparable replacements. Thank you

Hi, I am placing window seals in the Hurd Casement windows. Appears in the website that the old style seals have been replaced. Is that a good assumption? Can you help with the new style seals? Thanks

We have a Pella Proline sliding glass door from May 2005 that needs new seals. Attached are pictures. The seal that attaches to the door itself is Kerf style I believe and flat on the door but has a piece that sticks out an eighth or quarter inch off the door.

Hello, I removed this old plastic weatherstripping from my front door. I need that exact weathearstripping because anything thicker or bigger the door will not close. Thanks, Keith

Does anyone know where I can buy Anderson gasket, Like on pictures?

Our house was built in 2011 and the weather stripping is coming off. They are JEL-N-716. Wondering if you sell replacement.

Believe these are Kolbe windows, circa 1990 Looking for D shaped bubble (9/32" wide) with angled flange? that run parallel to the Back of the D

Need weatherstrip for 2 windows. Vertical pieces 70", Horizontal pieces 28". Total 392" plus scrap.

Need to replace gasket material

These are the window seals on JELD WEN casement windows on a house constructed in the early 80's. There are 2 seals on each window, one on the sash and one on the frame. I need seals for 3 windows, each measuring approximately 64 1/4" high and 23" wide. I also need the window operators for 2 wind ... (cont.)

My contractor is trying to replace the weatherstripping on Andersen Millenium series 400 window installed in 2003.

Here are the profiles I'm looking for....1000 ft. Of each ....im a home builder and we are responsible for supplying new weatherstripping for an existing home project

Need Pella sliding door weatherstrip that attaches between the sliding door and the threshold, the door is about 10 years old but we don't have any more info except the attached picture.

Looking for replacing all window gaskets on crank out Wi does. Do you have anything like this??

To whom it may concern, Would you happen to have anything like this? I thought it was the 58-187. Not so sure now. This is on the bottom of a door. Thanks. That is the clearest picture I can give you. I actually cut it off at the best section that was available.

I'm looking to replace both the astragal weatherstripping and the door sweeps on both French doors. The previous owner didn't weatherstrip properly and/or hadn't replaced them. There's a large enough gap when the doors are closed that you can see sunlight coming through and lets bugs in. In one ph ... (cont.)

Hi All, Here's a couple of pics of window glazing beads for which I'm looking. The first has a fold over element on top which has fallen off. I'll appreciate your guidance. Best, Note the 3 text line on the one should read 5/16" and is approximate.

This weatherstrip is installed at the bottom of the lower sash of a double hung window. It's a high quality window but I don't see any brand.

Good morning, been looking for replacement stops for these windows for about 2 months. We are in need of roughly 300 ft of this.

Oval/Bulb shape with attachment point to one side. No markings.