Viewing all customer Discussions for:

58-055 9/32" Bubble Seal With Angled Base, 25ft

This seal is located where top sash and botton meet in the middle. I need some replacements

Dear Sir/Mam, can you help me identify what brand and model this window is?This window was installed in the mid 1980's. It is a double hung window with thermal pane glazing. The part I need to replace is the [KERF MOUNTED V-STRIP] that forms the weather seal between the lower sash and the upper sash ... (cont.)

Can you please help me identify the weatherstripping I need to replace on some casement windows. I would need 80' total

I am replacing old, worn wkindow weather strip. I found the Milgard Windows manual which shows the exact seal I currently have, but I am unable to find a vendor. I would like to price the exact same weather strip I currently have: Milgard Windows Vent Bulb Weather strip WS1354BUWH (see 3 photos ... (cont.)

Can you please helpme out? If you stock this type of seal I need to purchase some.

Trying to find a good replacement weatherstrip. Dimensions are a little odd and it installs in a kerf where the window sash wood is also offset

Can you help me find this weather stripping part? MW window sash.

Hey all, Looking for about 182' of this style. Thank you, Erik

I have casement windows that the hardware says "Entry Gard Truth". The weatherstripping has an offset kerf with a 1/4" diameter foam bulb (see photos attached). The kerf slot in the window measures 1/8" wide. I am not seeing a good replacement on your site. Perhaps the 58-170B would work but I s ... (cont.)

Hello: I am looking for replacement weatherstripping for my Semco sliding glass door.

bulb style 1/4" bulb weatherstrip for Wellington Casement window frame

Hi Folks, Hope you can assist me in finding replacement weather stripping for a Caradco PN 4101341 french door (latch side) Thanks, Mike

Hello, this is weather stripping for a casement window on a home built in 1993. The hardware says TRUTH with an outline of a house. Thank you so much for your help!

The top sealing strip for a Jeld-wen casement window. It is about 5/8" wide and has a 1/4" kerf

Need new seal for leading edge of Pella sliding door. Probable mfr date is 2003-2004. See photos for profile, location on door and Mfr marking on one window pane with numbers.

It goes on the window frame

kerf height is 1/4 in. Total height is 5/8-in. some of my windows do not close all the way so I need something similar to this but taller. possibly a 7/8 in. or whatever you recommend.

Which Swisco product might I use to replace my broken stripping?

Hello, I am looking to replace my weather strip on my casement windows. Picture attached. Thank-you.

I have 29 Eagle Double Hung Oak windows that I need to replace the weather-stripping for. Is this something you can help me with? Thanks, Jerry