Viewing all customer Discussions for:

81-024 Peco Sliding Door Roller, 1-1/8" Concave BB Wheel

Hi have an 8 ft sliding glass door - we built the house in 1984 it says guardian - and its a single roller - looks much like either your 81-020 or 81-024. perhaps you have more insight. i dont have a picture

Assembly if 5/8" wide, 2 3/4" Long, 1 5/8" high, and wheel diameter is 1.25". Door dates from the 60's

Hi There, I can't find these patio door wheels and I was hoping you'd have a recommendation for an alternative that might have the same function/size. There is an inner housing that slides down to adjust the wheel 2 1/8" Long 1 1/4" High 5/8" Thick 3/4" Thick at the end with the lip 1" Wheel Diam ... (cont.)

I need to replace the roller for what I suspect to be a 1973 era sliding door. Previously, I purchased a couple rollers, however, they were not correct as the location of the height adjustment screw and the frame attachment were incorrect. As a last resort, replacing just the wheel will suffice. ... (cont.)

9/16" width 1 5/16" height Metal 1 1/4" roller

I can't see any identifying markings on this old roller. I am hoping your experts can identify what replacement I will need from the attached images.

Can you please help with a part# Thank you

The measurements for my rollers are included below. I have no marking or brand info. From what I see in your site, is seems that it is model 81-024. Can you please confirm or advise correct model? Measurements: H: 13/16", L: 2 1/2", W: 3/8" Thanks, Steve

Hi, My house was built in the early 60's. Attached are 3 different views of the roller assembly. *The metal roller itself had a plastic concave outer piece which has dissintegrated. Can you identify the best replacement part so that I can order some? Thank you Bryan B.

i have a single wheel assembly similar to Sliding Door Rollers 81-007 81-024 81-090 the set i have has "168" stamped on the side The measurement i have are 1 13/16 length - 1/2 wide - 1 1/16 tall - 1 1/8 wheel x 1/4 wide Can i Mail what i have to you for identification i will need 4 wheel ... (cont.)