Viewing all customer Discussions for:

81-039 Patio Sliding Glass Door Roller, 1-1/2" Dia.

Looking for a match for these rollers. They are from a sliding screen door that's about 20+ years old, im not sure of three door manufacturer. Thank you

Hoping you can help me out. I've uploaded two photos of damaged wheel assemblies for a sliding mirrored closet door. As you can see, the brand is PE Del Mar, and the concave wheel looks to measure about 1.5-in diameter. I'm thinking it is perhaps the 9-318 roller, but I'm trying to determine if that ... (cont.)

The roller assemblies I am replacing are 1 5/8 inches high, 2 1/2 inches long, 3/4 inch wide, and have a 1 1/4 inch diameter steel wheel

We have an older sliding glass door from the late 70s and need to replace the rollers. Could not find any markings on the hardware. Inside diameter of hardware width = 5/8" Overall hardware height = 1-3/16" Roller is approx 1-1/2" and metal with a V-groove to slide along lower rail. Only one screw h ... (cont.)

Need replacement wheels

Hi I need two glass patio door rollers. The roller itself is 1 1/2 inch in diameter. The other dimensions are in the pictures. I think I found one that will work but I wanted to double check before buying. Thank you

Do you have these in stock? Originally purchased 81-039 and they're the wrong size. 81-093 is close, but it's a smaller roller, does that matter? The roller on the original is 1.5 inch, so it's larger.

Nothing to Id this with. Too it to the pros at browns again nothing. Need a few of theseSmall steal ballbearings around the wheelOne wheel

1.5 inch wheel Part number 41781 Wheel is s&s vb-38 Total width approx 3 inch including wheel Total height of case approx 1.75 inch

Hello, hope these pictures will give you an idea of the roller type I need. The measurements of L 2.25 x H 1.5 x W 0.75 are approximate.

Hello Can you help me identify a pair of replacement rollers for my 1985 Likit sliding aluminum and double paned glass sliding patio door?

I need help identifying replacement rollers.

Can you identify my assembly with the photos I attached? The wheels are non-metal.

Looking for some quality replacement rollers for the attached pictures. Do you know what model these would be?

Sliding glass door roller

Hello I need the two bottom roller mechanisms for my glass patio door, the dimensions of the slider are 78"x36'x1,1/2" The roller assembly itself as pictured is 2 and 1/2 inches long by 3/4 inches width by 1 and 1/4 inch with the wheel mechanism able to extend out another 1/4 inch The only marki ... (cont.)

Roller for sliding glass aluminum door wheel 11/8x 3/8. Housing 2 1/2x 1 1/2

We need new rollers for a customers sliding patio door. Look at the photos. Will need two assemblies

Part labelled: Del Mar Engr Long Beach, Cal Pat. 3,670,357

Can these be overnighted ASAP