Viewing all customer Discussions for:

81-047 Sliding Door Roller Assembly, 1-1/2"dia. Concave BB

Do you carry these type of wheels?

Greetings, i am looking for a replacement. wheel is 1.5" and housing of body is 1.5", hope we can find something. Jims

I cant seem to figure out which assembly this is. Wheel is 1.5" diameter

Please help me identify this broken assembly so that I can replace it!Thank you, Tim

I'm looking to replace the rollers in my sliding glass door and I was hoping you could help. The roller is 20mm wide at it's thickest point, the body is 36mm tall and the nylon wheel is 38mm in diameter. I'm looking for 4 replacement parts if you have them.

Looking for replacement.

No marking at all.

HiDuring an older repair, I used another roller to replace the bottom rollers on my sliding glass doors. It was very close but not an exact replacement. I attached a photo of the original roller. Do you offer a replacement?

This appears to be your part number 81-047, but I want to confirm. the dimensions are almost exactly what you website show. I might have been 1/16 off on something. The wheel seems to work well, and turn freely, but the adjustment screw is stripped out. Wheel size is 1.5" On the assembly I actually ... (cont.)

Good afternoon, I was hoping you could help me identify a proper replacement for this glass door slider. On the wheel it reads Saunders Engineering. Is this something you carry?

I need two replacement rollers

Hi. I need replacement rollers for my (two) sliding screen doors. The existing rollers are metal with an aluminum casing. The wheel diameter is 1 7/16". The casing is 1 9/16" wide and 1 15/16" tall. I needed to drill out the screws securing them to the frame. I see no markings on the frame(s) or rol ... (cont.)

it looks a lot like the 81-046 except that I think i have a 1.5 in wheel. going to need 10.

I need 2 replacement sliding glass door rollers.

I need make sure its correct roller, i lake a homework and match side. Help me

1.5". Wheel Tab. is 5/16" wide

We live in south Florida so do you recommend the nylon or steel version? Do you recommend the nylon or steel version of the 1119 Roller assembly for use in south west Florida.

KILIAN, TORONTO CAN., SYRACUSE NY. IS ON THE ROLLER. ROLLER DIAMETER IS 1 5/8 INCHES.WITH IS 7/16 INCHES OVER ALL LENGTH INCLUDING ROLLER IS 2 1/2 INCHES WIDTH AT WIDEST POINT IS 13/16 ASSEMBLY HAS ONE SCREW AND IT PIVOTS ON PIN HAD TO DRIVE PIN OUT TO REMOVE ASSEMBLY PIN RIDES IN BOTTOM PART OF DO ... (cont.)

I have a 1965 slider with the roller having part number mbc 1119 on the side. 81-047 appears to be the correct replacement but has 1-1/2" roller and mine has 1-1/4" roller. Will this part fit?

I need to roller wheels For my back patio slider