Viewing all customer Discussions for:

81-084 Sliding Door Roller, 1-1/4"dia Nylon Concave BB

The uint is 28.42 mm high, 17.86 mm wide. The roolers are steel and 22.03 diameter wheel in channel (may be worn some, and 25.40 diameter ridge.

Looking for rollers for 50 year old aluminum patio door. My rollers seem to measure 11/8 diameter.lenth approx 3"

Might be a 40 year old door

I am trying to locate some replacement rollers for an older style patio door.

Hello, Old house; new to us. We are hoping replacement of these rollers will do the trick. The wheels appear to be nylon and have these words on one side: SYRACUSE NY TORONTO, CANADA KILIAN. They seem to be 1.25" in diameter and 3/8" wide. The largest piece of the housing is 3 1/6 by 1 1/16 by 11/16 ... (cont.)

Look & look seeing if u have something similar to the pics

Hi, I'm looking for 2 of these wheels. Is it possibly the product code 81-084? Thank you in advance!

These rollers are from a Macor sliding door. Only product info is Product of Del Mar eng co. Long Beach Cal Pat 3,670,357 Notice you suggested your part # 81-357 which looks like it could work for me. Unless you have two roller models now?

I have a 1963 home with old sliding aluminum glass doors. There are two different roller assemblies. The rusty one, with only one screw hole sits at the rear of the door. The rusty one has the pin hole worn, so I cannot just replace the wheel. The one with the two holes sits at the front of the d ... (cont.)

I have no clue. No markings on the door either. Looks like from 1970s.

Hi, this company (International Window) seems to be out of business and we're having a hard time finding the replacement roller for our patio sliding door. The door is almost 25 years old. Can you help me somehow? Thanks!

Looking for this sliding glass door wheel assembly part. There is a black line in the drawing, that is where a piece of the hardware broke off. Thanks for the help, you guys rock.

Refer to the two photos... I am trying to locate a pair of rollers that could be used to replace these vary badly worn out aluminum sliding glass rollers . Your company was recommended in a you tube, how too video Primarily these have two ears at the top of the single wheeled rollers. If there is a ... (cont.)

This is a roller from a patio door ? that is glass.

We don't know the manufacturer of the door, but could use your help in getting the part replaced. Thanks , Don

Looking for wheel assembly for a 50 year old Panaview slider. Wheels on this are 1-11/16th inch vinyl. Total height from top of assembly to bottom of wheel and track contact is 2"as shown in photo. Needing to find two. Thank you in advance. Michael

need two sets of tandem rollers for an old aluminum sliding glass patio door. can't seem to find anywhere with the odd tabs. any ideas?

Hello, Please help me identify the replacement part for the attached roller. It is for a glass patio door. Thanks

Has ears at top to lock in on aluminum frame with one screw to hold in place.

tab for screw missing, need to purchase.