Viewing all customer Discussions for:

81-125 Sliding Door Roller, 1-1/8" Steel Wheel

Frame is 9/16 thick 1" wide 2 3/8" with wheel inserted

Insert to wheel holder says #D-719 Says on it. This is for custom sliding closet mirrored doors 5/8" thick 2 3/8" x 1"

Part has D-179 Stamped on side. Rollers look to be plastic and are no longer round. I have 3 mirrored sliding closet doors on 2 tracks. Doors lift up to be pulled out. rollers on bottom. 2 rollers on each door I was able to remove roller assembly from its casing which is held in on bottom of door f ... (cont.)

I need a replacement part. The dimensions are the same as a 81-125 (2-1/8" x 1" x 9/16") with a Nylon 1-1/4" largest dia. (1-1/8" small dia) roller. There is a stamp of D-719 on the part with roller. These doors are likely 30yrs old. Thanks, Brad

Hi, I could not find any numbers, but wheel is around 1 1/8 " .

hi, have a closet with mirror sliding doors. theres a sticker on the back of the mirror. Buchmin Industries Reedley CA 93654 16CFR 1201 CAT II Z97.1 1984 I'd like to get 4 spare wheels.

I am looking for the wheel assembly for a closet door manufactured by Buchmin Industries in 1975. The legend on the sticker is Z97.1 1975 and was on the back side of the door. When I tried to call the number was disconnected or closed. If you help me to find the part in Denver or if you have it in ... (cont.)

First photo is as mounted in bottom of door. Second photo is of entire roller assembly removed from door bottom. Third photo is the roller wheel assembly removed from housing. Fourth photo is another view or roller assembly, stamped "D-719".

Swisco, I received my order but the (4) 23-199 : Mirror Door Bottom Roller, Convex (4) 23-222B : Sliding Mirror Door Top Roller Guide are too tall to fit into the mirror doors I have. Attached are photos of replacement parts I need. The space inside the doors for replacement parts is abo ... (cont.)

I NEED TWO ROLLER ASSEMBLIES. WOULD ALSO LIKE TO PURCHASE TWO ADDITIONAL FOR FUTURE Use.

doors are about 4' x 8'

Do you have a 81-125 roller assembly with nylon rollers? This goes on a sliding mirror closet doors with an aluminum track. I was concerned that the steel wheels would be a little harsh on the aluminum track. At the present time one wheel has a flat spot and needs replacement.

This is the type of wheels I need for my patio sliding glass. There are no markings, and the house was built in 1979 in So. Ca. The length is 3" and the tabs on top slide into slots on the sill, so removal of the bottom sill is unnecessary. If you have these I'll need a pair, and will also order so ... (cont.)

I have taken pictures of the roller mechanism that I need replaced. Please send a reply email indicating the correct replacement from your company (please include part number). I will need 4.

I am trying to identify a replacement part for my sliding door rollers. The dimensions of the housing are 9/16" wide (3/4" tabs), 1" high, 2 1/8" long (main housing). Pics attached. Thanks for any help!