Viewing all customer Discussions for:

81-125 Sliding Door Roller, 1-1/8" Steel Wheel

Flat roller on my mirror closet door. Parts number is 41781Nylon roller about 5/8 inch thick 2 inches long and 1 inch high. Thanks Thomas

D-719

no name no part number, 2 1/8" long, 5/8" wide at bump outs, 1 1/16" tall

I reached out to you a few weeks ago. I ordered and received new track for my sliding mirrored. I think I now need new rollers. I would need four of the ones shown in the photos.

Looking for replacement parts for my closet door. The wheels and track and worn and need to be replaced. The roller and roller housing are made of steel. The track is also made of steel. Roller housing - 2 1/4" x 1" x 3/4 Roller - 1"

Need to replace the roller and this is the picture the #in the old part are 41781

Needing to locate one of these roller guides. It has a D-719 part number. There are some on your website that look similar, but none that have the two hooks on the top, which are key for proper installation and operation of the roller. (BTW in the pictures, the two roller components have been slight ... (cont.)

Front wheel and rear wheel are the same. Door is 62 1/2" wide and 92 1/2" tall. Wood frame. I Cannot find any markings on this wheel assembly. They are brass with the wheel adjustment slot angled for adjusting. Front screw for height adjustment. Wheel is 1 1/4" diameter. Width side to side is 3/4" ... (cont.)

This is a roller from a closet mirrored door measuring 60in width x 78in tall.

I have four large mirrored closet doors and I need 8 of these closet door slides

Sliding patio doors likely made in 50s. The half that slides(?) has not slid for years and decided to fix finally. After removing door, I found this single skeleton of one assembly. No wheel(s) on it and there was no assembly at all on other side. It's so old I can't find replacement anywhere - saw ... (cont.)

The rollers are on the underside of the frame holding a large glass mirror and are approximately 35 years old. The hardware portion is intact but the rollers (plastic) and bearings are worn.

Need help in finding 8 roller replacements for mirrored closet doors. Hope these pictures are adequate enough. 'Production Enterprise Miami Florida' is stamped on the wheel. Thanks soooooo much for your time and help.Pete

Please see our 81-125, our parts experts think you'll find this matches pretty well. We recommend that you carefully examining our dimensions just to be 100% sure.

Wheel is flattened on this roller for a heavy mirrored single panel closet door. Looks like i need to replace the inside piece that has the number D-719 stamped on it.

Single roller

no markings found

The wheel says

Hi I have a rental with a sliding glass patio door with both rollers removed. Any idea how to narrow down what the right rollers are without having one to compare? Stephanie W

I need to replace these. Please let me know which one I have. The roller is concave.