Viewing all customer Discussions for:

82-302 Key Tumbler For 1" Thick Door

I would like to add a key lock assembly to this door. Do you have one that will fit this door? As you can see it is an inch wide and the locking mechanism is for one hole only.

Have pics of existing door handle with 4 15/16ths screw holes with fixed anti-lift arm and rotating latch key but I don't have key cylinder and want a lockable handle. Existing interior handle has slot for key cylinder arm and other than handle itself the locking hardware portion is the same as 82-0 ... (cont.)

We just purchased an older home constructed in the early 80's that has three sliding glass doors. The locking mechanism is broken on one and we would like to replace all three. Hopefully the attached pictures help. I found a mfg label that I can still read what looks like: - Code 172-1 - Se ... (cont.)

I have lost the key and need to replace this handle with another that is similar. The Dimensions are (Length 7 5/8" withe 15/16

I don't have a key to this cylinder, which is 3/4" long and has the number 137 stamped on its face. Would you have a replacement part? Or can a key by made from the cylinder?

I want to replace (or modify) our patio door lock DNS industries 16 inside pull standard with a keyed lock for entry from the outside. I'm lost at finding a keyed locking replacement. As long as it fits my door and its keyed, what are your recommendations. Help! Penny

If the lock tumbler 82-302 is too long, cold you possibly trim it down to size?

I ordered a new 82-002K handle set with keyed lock The tumbler supplied (13/16) is too short. The original tumbler is 1 inch. The little tag does not engage because the tumbler shaft is not long enough. Unfortunately the first set I ordered I broke a piece and had to order a new set. So my doo ... (cont.)

Hi, I have a 1.5" thick sliding glass doors. Can you suggest a tumbler lock for it? My handle is black and looks a lot like your 82-002K Thanks, M.

I just received my order for a 82-306 Keyed Exterior Sliding Door Pull. Just curious before I start if the part will match with the interior sliding door plate and opening slider. Picture of the inside attached. If the part does not work with the inside plate, do you have a compatible inside plate ... (cont.)

Product code 82-002K. After placing the 82-002K into the checkout cart it showed a related item,( key tumbler #82-302). if this is the key tumbler that goes in the 82-002K handle set it does not appear to be long enough at 1 inch? Is the key tumbler in the 82-002K longer? Thanks,David ... (cont.)

I need a new key lock for our sliding glass door to make it a safe entrance/exit, since we don't have the key for the current assembly. But I'm not sure which key lock to order from all your choices. I'm attaching photos of the lock we have. Please let me know if you can determine what I need. Thank ... (cont.)