Viewing all customer Discussions for:

10-102 3/4" Round Shower Door Wheel

Please refer to pictures attached. The most critical measure is the distance between the bolt center that goes through the glass and the inner bottom (if you invert the picture) of the "U" shape that hugs the top of the glass door - that is a bit more than 3/4" (13/16" to 7/8"); I guess this distanc ... (cont.)

Hi, I'm looking for rollers to replace some ball bearing rollers for my kitchen cabinet drawers. I've included pictures and dimensions that I was able to determine. I have no idea the brand name of the rollers. Please let me know if you need more information. Thanks Gary

The photo attached is a cracked bracket and roller for an old sttyle framed shower door . The bracket has since failed (broke along the cracked surface) so the door doesn't roll. Do you have (or know where I can get ) a replacement for this roller/bracket assembly? Thanks much.

The wheel to the shower rusted off. What would you recommend for this? I see the double, but do you have a single? Thanks!

Hi, I could also use some help on how to attach sliders on bottom of glass doors. I totally forgot because it's been a few years since i have had the doors off. I do have the rollers on the top of the doors, so i guess i'm set to go there. Just not sure how the bottom sliders go. If there are on lin ... (cont.)

Here

Hello, Need to replace the wheel or entire right side of kitchen cabinet drawer. This drawer has metal left and right sides with the drawer slide built in vs wood construction with euro slide attached. Wheel is 3/4" diameter, 3/16" wide. Thanks.

Hi Maybe you can help me get this weel, I've tried local hardware and home Depot but they all have a thicker weel that the dor doesn't fit into the track. Thank you so much Shloimy

Shower door roller

I need two hangers like this with a distance of 1 1/4 inches. The wheels are just 3/4 inch each.

As pics show, says LAWRENCE on back. Wheel diam. is 3/4" My husband is the 'handy man'/contractor. Can't find anything local that will work. Thanks!

Goes on top of mirrored closet door. May be the original equiptment for home built in 1960. Thanks for you help.

my Rollyson Patio Sliding Door needs a complete screen assembly. Can I buy a replacement at lowes or Home Depot, perhaps a genric version? Thanks Bob

I am looking for a file cabinet slider 3/4" outside diameter hole 3/8"

i need to replace the shower door rollers, but I couldn't find a similar part, I saw rollers but I'm not sure how to get the wheels off?

The hinges/wheels on my old pocket doors broke. There are no part numbers on them or even the door handle in case it was a kit. The wheel is suppose to be attached as one piece. I put a screw in thinking it would work and it's not working even with a lock nut. Please help me find replacement hinges/ ... (cont.)

I am trying to find a 3/4" wheel that I can attach to left side of these pictures where the wheel is missing (original was put on with a rivet but I need a screw based one now). Alternatively I could purchase a new set of rails if you have 20" with the L-shape at the end (I have not been able to ... (cont.)

The width is 1.5 inches total 1.0 inch total metal part width of the metal strip 0.25 inch

I ordered 8 of part 23-047. The roller is flat not round like the old one. Can help with the proper match or remedy ? Fits to tight in track. Brad

I have been looking fruitlessly for some time for replacement wheels for my shower doors. They are 3/4" O.D. with ball-bearing race and brass hollow bored axle for a self-tapping screw. The wheel itself, however, is only 3/16" width, with a flat profile, and that's the problem, as any potential sup ... (cont.)