Viewing all customer Discussions for:

90-058 Keeper Shim, 2-1/16"

Wondering if you can help me with a window problem? I have some older certainteed vinyl replacement windows installed in our house. Some of them won

I am looking for replacement parts for some MW windows. I have decided to purchase some 90-077A,177,and 058. I also need some seals for the top window jamb. These are wooded dbl hung MW windows and there are snap-in seals(tan color) that fit in a cut out on the top jamb. The top sash, already wi ... (cont.)

Attached is a photo of existing sash locks that I would like to see if you carry. The locks are from MW Windows (the original windows on my home), but MW Windows is no longer in business. In addition to the sash locks, I am looking for the metal shims that go with each piece of the lock (the l ... (cont.)

I HAVE 12 ENTRYGARD LOCKS (40264) WITH LUGS AND STRIKERS. I HAVE 1 BROKEN STRIKER TO REPLACE. THESE STRIKERS ARE MOUNTED TO THE UPPER SASH AS EXPECTED. MY PROBLEM IS WITH THE WINDOW CLOSED THE STRIKER IS TOO LOW FOR THE LOCK TO ENGAGE THE STRIKER. ARE THERE SHIMS AVAILABLE TO RAISE THE STRIKER S ... (cont.)

My vinyl windows that tilt inward for cleaning purposes are not going down all the way to lock the sash. It gets very close but I am afraid to jam the window down to lock it. This has happened on two windows in my house. Could it be the weather stripping is warped? Can that be taken off and repl ... (cont.)

how thick is the 90-058 shim?

My house is 85 years old, and the windows no longer match up in the center. Do you sell a spacer to place under the keeper? I have two windows that were fixed with white plastic spacers, and don't know where they came from, but I do know they exist.