Viewing all customer Discussions for:

95-169 Andersen 3/4" x 7/16" Screen Frame Corner

This is a picture of the broken part. I took measurements and here is what I got. looks to be 3/8 inch wide and total length of about 1 15/16. There is a little divider that looks to be about 3/16 wide as well. Please direct me in the direction of the part that I need to replace them. Thank you, Ma ... (cont.)

Need to replace the corners which are cracked

looking for some mitered corners 7/17 is width of screen the black one is one I found that works even though it is only 5/16" thick from Hurd windows alum clad csmt 2008 I used to well windows and millwork so am pretty familiar with this stuff

how much allowance should be taken from the cut for this type of corner. 1/4 of an inch?

Need the key in the included image. The 95-169 and 95-181 was suggested, however that will not work.

Plastic. White. Appears to be a Prime catalog #PL15758. I will need between 4 and 8 units. My customer has only brought in one screen so far, but he believes the other one will also need corners replaced. Can you identify and supply this piece? Regards, Norm

Do you carry the corners for Andersen screen latches?

Not sure if your Part #95-169 is the correct bottom corner. I don't see that it has the slot for the screen latch to slide in. Please advise.

The corners of my Eagle window screens are starting to break. They are about 12 years old. Before Eagle was Anderson, I could get corner brackets from them. Can you tell me where I can get these. Sorry it's broken!

I purchased (4) 95-169 corner keys. I have a mid-1970's Anderson screen. The corner key was not a perfect match. I am attaching 2 photos that show the differences. From the pictures I have diagrammed: Mine Yours 95-169 A 5/8"

Looking for corner keys for 5/16" width. Picture of existing pieces below.

We are looking to find out what this is we need to get these ASAP so we can build the customers window/screen! the actual corner of the screen corner is slightly thicker (7/16) than the rest of the part that slides up into the screen frame (3/8)thick...I checked the frame work and didn't see any bra ... (cont.)

Anderson screen corners white in color

Looking for a supply of Hurd Corner Inserts. Attached an image of the broken piece. 3/8" x 1/2" wide, about 1-3/4" long to corner.

Please help me identify screen window corners for andersons attached are 2 pictures measured 3/8 inside and cost per unit thank you John R

Hello, I could use some assistance in identifying these screen corners so that I can order them from you. Thank you.

My house was built in 1998 and I have Anderson windows. I want rescreen the window screens and I need help choosing the correct foam spline size. I measured the screen frame face and it is 3/4". The channel that the metal spline is in is about 1/4". Do I need the .250 or the .270 spline? Thanks ... (cont.)

While I can't identify my windows, the screen keys appear identical to 95-181 except for the diagonal, which is 3/16". From what I have read on your posts, the 95-181 has a 1/16" diagonal, which, if used, will result in a 3/16" gap with the window frame. The 95-169 shows a 3/16" diagonal, but does ... (cont.)

will the 3/4" x 7/16" outside screen frame corner key (95-229) fit an andersen screen? these are the same dimensions as my screen, just tne appearance is slightly different: my corner key is a hollowed out square at the corner, instead of filled in solid. please let me know if this part will f ... (cont.)

I am looking for the appropriate part number for some window insect screen corners. I am attaching pictures of both sides of the broken corner ; the channel (miter cut at 45 degrees); and dimensions. What I need are just the corners to fit in the channel shown. The screen is for an Andersen Wi ... (cont.)