Viewing all customer Discussions for:

20-011 Wood Sash Lift, Pair

Am trying to replace the missing sash pulls on my 1929 house. Here's a photo of one of the ones which is still on a window. They ate approximately 1.5" across. I am missing 4.

I wanted t know the measurements of the entire item, not just the distance between the two holes.length by with please.Thank you, Karen-Lee

I'm using these sash lifts to replace ones that had been painter over and need to align with the same screw holes. What is the measurement between screw holes?

I need the following1. Plastic white U channel - goes in weep hole in the the screen channel.2. Lift handle for old sash wood windows. Need brush nickel. Can be approx. size & style per picture.3. Window lock for old sash lift wood window. Need brush nickelthanks,John

Looking for replacement parts (like the sash lift photo attached) for our windows in Pittsburgh PA. Cannot find identifying markings on the hardware. I found one stamp on the aluminum that looks like TTI CBA ll-99, but no one seems to know who the manufacturer is.

What is the screw spacing and dimension of the 20-011 sash lift? Do I order 1 pair or 2 for each window that is missing the lifts?

Window lock and keeper 1-5/8" and a handle with holes at 3/4", 2" and 3-5/32" from L to R (handle is 4" wide and 1-1/8" high) All pieces are flush, not recessed. I would like matching white or silver parts.

I have limited clearance for a swinging door. Once the handle is installed, can you tell me the depth of fhe handle from the face of the sash to the tip of the lip? Thanks

I am looking for this product in a brush nickel finish, Would it be possible to get it ordered from you?

I am looking for replacements parts for the l-shaped sash lift pictured (2 13/16" x 1" x 3/16") with center-to-center holes 2" apart. I have 9 windows and about half the lifts are broken. My windows lack markings and part numbers, at least I couldn't locate any. Here is what I do know: vinyl win ... (cont.)

The current pulls are made of plastic. When the window is shut, the part that holds the screws in the pull to the window is only one eighth of an inch depth. Do you have anything that could replace the current plastic pulls as the the Curved part is broken? Thank you, Kathy

Greetings I need to purchase a number of window lift's that are the same size as 20-010, but would like a nickel finish instead brass. Do you sell the lift's in a nickel or something similar? thank you