Viewing all customer Discussions for:

21-049 Bifold Door Guide Pin, Leigh, Full-VU Doors

looking for pins/parts for several bi fold doors. We need top and bottom sliding side and stationary side pins. From the photos provided, can you suggest the proper item numbers?

Need some mounting hardware as a few pins are missing and some exist but seem to have nothing holding them in place. The tracks appear to be in good order.

I ordered 21-402 & 21-150 & 21-108 for a mirrored bifold closet doors. 21-108 does not fit in the track I ordered i talked to one of your reps and they said i need new pins and caps to fit the track she asked me to send pics of the old pins they. can you let me know what all i need to order to fit t ... (cont.)

I'm having some trouble locating the hardware for my bi fold doors. I've checked the stuff at the big box stores and it isn't long enough to fit through both holes and I cannot find the plastic bushings that the rods go in. Perhaps you can be of some assistance thank you.

My appartment complex has about 300 leigh doors, all it says on the doors is quality control approval number 559245 I need hardware kits for the pins and the bushings that slide in the rails both top and bottom

I havre a set of bifold mirrored doors, with what appears to be 21-058 as the top guides ( only they are 4 1/4" long= complete with spring clip and guide. However the bottom guide ( not the pivot) seems to be 21-049 - ie no spring and that little nylon guide - actually two of them and it i ... (cont.)

hello, the 21-014, 21-049, and 21-058 appear to be the same pin with differnt accesory parts. Am I correct? Is ther any differece as to where the hole for the cotter pin is drilled? Ie. is one part 2" from the top vs 2.5" from the top...

I have attached files of pics I took of my doors. I hope you can confirm the parts I need to order that will work. My doors have tracks on the top and bottom. I only need 1pin for the top and 1pin for the bottom. The pics I sent show that the bottom pin doesn't need to have a spring. The pin caps ar ... (cont.)

The community here must have 1000's of these folding doors but our maintenence crew contends they can't find the parts. I would like to buy the parts to fix my own door and refer our people to where to get the parts. (I assume you can supply). Here are some pictures of the fittings on the doors. I w ... (cont.)

I need this part for my Bi Fold metal door but i didn't see any spring in assembly. do we need to buy the spring sprate and what about the bottom of the door do we used same assembly. My door is Leigh and part number is 8433 because i saw paper on the door. I need help to find the right part . Waiti ... (cont.)

Hello, I have a set of Leigh Full=Vu metal bi-fold doors at my furnace closet. The opening width is 42 3/8 inches. each panel of the door is 10 1/8 wide and each door total is 20 3/8 inches by 78 1/2 inches tall. The doors appear to be in good condition but most of the hardware is either missi ... (cont.)

There is not an instructional guide available to replace the Full-VU hardware. It is important to pay close attention to what and where you are removing hardware so you can replace it in the same manner. It may help to take photos before and during the removal of hardware, to have a reference to i ... (cont.)