Viewing all customer Discussions for:

21-049 Bifold Door Guide Pin, Leigh, Full-VU Doors

Hello, Need replacement plastic sliders for top and bottom rails. The pin is 5 1/4 inch long, 1/4 inch wide. I would also appreciate receiving information about a full set of replacement parts (top and bottom). No idea who manufacturer was. Thank you in advance.

Need replacement bottom pins and a couple plastic sliders for the bottom rails. Pic1 shows top pivot pin (which I have all of), pic 2 shows bottom of a door, pic 3 shows the one bottom pin and the plastic slider that it snaps into. The rail is at (or just over) 7/16ths inch wide. The pin is 5 1/4 ... (cont.)

The stationary pins seem to be OK (although I should probably replace them also) but I need the assemblies for the parts that slide back and forth in the track - both top and bottom are gone. Can you please identify what I need to buy to re-hang these doors? They are quite old and don't match the ne ... (cont.)

Building is built maybe in late 1960? I want to replace all pivot parts at top and bottom.

Hi, I want to replace all hardware on 3 of these bifold doors (including top and bottom tracks). The door openings are 4' x 8 '. All of the plastic clips are worn out and the tracks are beat up.

I need the top stationaries abd bottom and top pivits.

I have two sets of metal bifold doors that are old and don't work well. They don't stay in their nylon clips, are hard to open and shut, etc. I think the tracks are still okay, so I want to get all new pins, springs, nuts, and nylon clips for top and bottom rails (I assume you can replace those by r ... (cont.)

Pictures are of top and bottom pivot pins for a metal bifold closet door. I also need door guide pins and cap. Sticker says FUll-VU DOORS Quality control approval no 239764

The pictures show a pin which you have to push up and slide into the double-u shaped plastic slide. The doors are over 25 years old. I can't find the parts in any store such as Home Depot, Lowes, Ace Hardware and an old hardware store. I havae called every bifold door place and can't find the par ... (cont.)

Hi, I have a bi-fold mirror door. There are top and bottom pivot pins attached, as well as a top guide pin. I found a loose/detached pin which appears to be the bottom guide pin. It's 4-1/4 inch long without any threads or cot pin hole. I need help finding the missing parts to put the pin back in pl ... (cont.)

Hello,As you can see I have part #21-205 bracket. I am missing the pin that goes with it. Are you able to let me know what part I need? Not sure if the diagram is helpful.Thank you,Eve

I need a replacement pin that was misplaced somewhere throughout the ownership of this home. It is the guy pinned snaps in the track at the bottom and slides from a set of bi-folding doors from the late 70s.

We are looking for any replaceable parts to the Monarch Metal Bi-fold doors,We have 8 bi-fold doors (or 4 double doors) and some are missing parts at the top or bottom so they do not slide in the track.All of the hinge side of the doors are fine, so its only the top and bottoms where it slides in th ... (cont.)

HelloI moved into a condo with metal closet doors. One door is off the track and someone has tried to fix in the past. I think they are from the 70s. I hope I don't have to replace the tracks top and bottom. Photos are of parts that appear to be in need of replacement. I don't see any numbers or mar ... (cont.)

It looks like I need 5 sets of the 21-049 guide pin, cap and nylon spacer(for lack of a better term). My question is this: Does the cap fit in the bottom track? If I seeing things correctly the nest logical question is how do you get the cap in the bottom track? Does it just sit in the track or ... (cont.)

Not sure what I need. Some of the bottom pins and plastic guides that go in the floor track are missing, and one of the pins and guides for the top track is missing. 1974 vintage.

It appears that these doors were already make shift to me. I originally thought the nylon was threaded but it just appears that the bolt eventually pushed through the door pin cap.

I'm looking for track parts fittings for the doors

I have a FULL-VU closet door composed of two bi-panel elements. To repair it I started to document each element: top pivot 5/16" top glide 1/4" bottom pivot 5/16" bottom glide 1/4" A very wise decision as there appeared to be only simple pins and such. Actually each of the four locations, a ... (cont.)

one panel is sagging and is dragging on the bottom track. Was told it needs a new pin that will raise the door and lock it in place