Viewing all customer Discussions for:

23-027 Top Sliding Closet Door Roller, Acme

You should be able to tilt the door and lift it off. Check out the video below, this should help.

Trying to identify this device. I live in Toronto Canada and would probably need to order it from the USA. How are these devices attached to the door frame? I see no screws.

I save several very heavy 8' mirrored closet doors from the mid-70's. The current rollers/tracks make it very difficult to open/close. Is there new and improved hardware/tracks that will work for these doors. Markings on hardware = Acme 3750337

Hi I live in England and was wondering if you could help me with this I need part no 17 4207 000 top roller for sliding wardrobes The roller is missing off the top white plastic bit the no I gave seems to be the part no

I bought the 23-215 guide and the 23-093 roller for my bypass closet doors. It looks like a good fit on your website, but the bending tabs don't match my old rollers' tabs.

This is a ramtrack product. I need 2 of them. Thanks

Don't know what to enter

Hello, The top guide parts show ACME 17-4207-000. I could not find part codes for the bottom rollers. I would be looking to order 4 bottom rollers and 4 top guides. Thanks

Hello - As you can see from the photos, I ordered your part 23-027 to replace my part. As you can see, my old part is wider and fits in the frame differently than the new one. The new one is also lighter weight. The new one can not be attached to the door or frame except with the top hook below the ... (cont.)

I'm looking at your 23-016 closet roller. I have medal framed mirrored closet doors and the top rollers on the back door have worn and are throwing the door off it's track periodically. The attached picture shows the current hanger assembly, labeled DSH 20121. Will your 23-016 replace the upper hang ... (cont.)

Hi there, I have a broken door hanger and I attach a photo of one not broken. It is a plastic version and the wheel has broken off because the plastic has snapped As the door is years old I would be very pleased if it can be repaired using your part no. 23-027. If you can confirm that 23-027 ... (cont.)

can you identify this part, Will need 4 please. I wrong it on when I first order

Stanley mirror closet door

We are looking for the above part (front and back shown for your information) as these need replacement on an old Acme sliding wardrobe door. We are based in the UK so perhaps you have a distributor for parts here that you could pass on to me.Any help would be gratefully received.Many thanks,Andrew ... (cont.)

Cannot locate in any of the hardware stores in my city.

We have 2 sliding closet door. Top roller is busted and looks like your 23-027.in your dimension picture....you do not have the measurement from the left lower hole to the end. on mine the CENTER o the hole to the bottom is 1 - 1/4". Is it possible to measure yours and see if that matches?Do you thi ... (cont.)

Closet door top rollers on an 80s single wide mobile home

I am looking to replace the hardware for these 8' sliding closet doors.

Hi, I'm trying to find a dsh-20121 roller/hanger. Do you have a replacement part for this? Thanks!

Hi. I am looking for a suitable replacement for the above Stanley top roller part. Do you have anything suitable?