Discussions for 23-028 : SWISCO.com

How do you adjust the 23-028 Mirror Door Roller?

I just purchased 4 Mirror Door Rollers from Swisco...the onesthat are currently on the doors do not "adjust" up or down when I turn the adjustment bolt. I believe that the center hole where the bolt screws into the top of the "wheel housing" is supposed to be threaded...all four of mine are stripped ... (cont.)

Bottom roller

Hi. I need 1 bottom roller. I've attached pictures of it installed on the back of a mirrored 1978 Monarch Mirror sliding aluminum rails. Roller wheel needs grooved. I took a picture of the one I have which I'm sure you can read it says code Category II CFR 1201

+1

Roller replacement

Hello - Ive already identified the track that I need but I want to order replacement wheels as well. Can you advise?

Desperately need new track for my bypass mirrored doors

Hi - I haven't disassembled anything yet (sliding mirrored bypass doors), but was hoping these pictures would be enough to identify what we might need. The track is in horrible shape but the rollers may still be okay. The track is 96" long so I guess we'd need two 48" pieces but I'm not sure that an ... (cont.)

Need trac and rollers for a Bi pass Monarch mirror closet door

Looking for replacement parts for Monarch closet mirrored doors: One bottom trac for a 70 5/8" or (72" to be cut) plus 3 rollers One bottom track for a 58 1/2" or (60" to be cut to size) plus 3 rollers. Can you advise parts numbers to order. Also would like to know your shipping to Calif zip code 9 ... (cont.)

Missing mirror door rollers

I'm looking for bottom mirror door rollers. It is an old 2 door 6' wide x 78" high mirrored closet door, that was never installed.

+2

Roller broken

The one in the picture is ok. But other one on the door broken. Do you have such?

replacement bottom conclave track

i think that this is this part number. 23-272 i measured 1 5/8 between center of concave track and 3" wide Note you were able to identify replacement casement window crank HW which i orderede

+3

BOTTOM CLOSER DOOR TRACK

Need a bottom track st least 93.5" long for sliding mirrored closet doors.

Sliding bypass mirror closet door bottom track

The bottom track for this door is bent/damaged and needs to be replaced. The doors are from Monarch Mirror Door Co. The track is 72" long and 3" wide. The rollers appear to be concave. Looking around the website the closest thing I'm seeing is product 23-272, but I'm not sure that will work as t ... (cont.)

+1

Monarch door tracks

I need to two door tracks see pics above. Thank you Mark

+1

closet door roller

3" inches tall (to bottom of wheel), 1.75" inches wide, 3/5" inch deep

Replacement sliding closet rail

Need this rail, that fits this wheel

bottom track for ancient mirror bypass closet doors

As you can see the originals are rusty. Track is 3" wide, Outside edge is 1/2 ". I can probably figure out the wheel / roller things for the doors but I don't know how to tell if they are concave. THANK YOU!!!

+2

Closet Hardware

Oh my gosh - I have exact same issue. 1983 construction, mirrored bypass closet doors, rusty & useless tracks. As both the bottom track and door rollers will be replaced, do they need to match the originals? Also, how do I tell if the door things are "concave" please? Thank you!

+2

Double Mirror Sliding Closet Doors

Hi good morning, I hope you can assist me in finding the right parts for our double mirror closet roller and a bottom door track. The first photo is the bottom metal frame of mirror door which is rusted, Does the frame changeable and do you sell this frame. 2nd and 3rd photos are the old rollers, ... (cont.)

+1

Closet door track

Trying to verify if you have parts for my closet doors. I attached pictures of the existing track with tape measure. Also the existing concave roller assembly. I need 60" of track to replace the existing, which is very bent. To me it looks like your catalog indicates I need part number 23-272 as t ... (cont.)

Mirror doors sliding bottom track

This bottom track for my sliding mirror doors is bent all out of shape. It is 71 in Long. I think it looks like your concave roller track. What do you think?

+2

72" TRACK NEEDED FOR MONARCH MIRROR DOORS

I AM LOOKING FOR 2 TRACKS FOR OUR MONARCH DOORS BOTH OPENINGS 72" THE WHEEL IS CONCAVE AND SITS ON A RIM

Looking for replacement wheel or pulley for sliding mirror door

Dear Swisco, we have an old "place-built" sliding mirror door where the wheel has broken of its pulley. We have looked left and right for a fix and finally stumbled upon your site. My guess is that 23-028 is fairly close to what we have. Do you think it would work or do you have a better suggestion ... (cont.)

+1

Viewing all customer Discussions for: 23-028 Mirror Door Roller, Concave

Viewing all customer Discussions for:
23-028 Mirror Door Roller, Concave