Viewing all customer Discussions for:

23-028 Mirror Door Roller, Concave

Hi I need to replace bottom track on closet mirrored doors. Also need wheel assy as pictured with track. I need 10 ft of track and 2 wheels. Thanks let me know if any ?

I need a replacement Aluminum Bypass Door Bottom track for my closet length is 71" and width is 3.25". See attachment

I need a track for a Mirrored closet door

Hello, I have a monarch mirror door AFG161290. I need 8ft of track, rollers for 2 doors and the plastic guides for the top. Can you help me with placing an order. I have supplied photos of all

Found what appears to be an exact match on another website. Measurements and appearance are an exact match.Not sure I can tell you anything more than the 4 pictures will tell you.Thanks in advance for you help with this.Steve

Lookin to replace a 48" track and rollers

Looking for this specific closet wheel. And I need 4 of them.

right picture is my damaged roller.left picture is comparing roller between mine and the one I bought from home depot. after I replaced with new one, I tried returning to on track.But height was longer, I could not put into the track.Do you have same size with my damaged one?injo ... (cont.)

Old closet door trying to revive but only had those hardware. I would appreciate if you guys can help me find something like this or recommend any replacement parts for the sliding glass doors I have thanks in advance.

I need a bottom roller it is concave in structure. I sent pictures along with ape measure dimensions. I can deal with the entire assembly or just the insert . Please help

Hi...Need parts for closet glass sliding doors. I need to replace bottom track measuring 70.5 inches by 3 3/8 inches. Also need 4 wheels. I have enclosed pictures. The name of the company is Monarch Mirrored Door Company. Thanks

I need the edge/pull for monarch sliding mirror glass door and wheel Monarch AFG-2-2-03-90

5 3/4 inch from the wheel to the head of the screw. 2 3/4 flange to flange. Do you have this part? Also the plastic clip goes at the top of the drawer. Dee

Looking for several parts. 1ST, Track, length is 5' 3 1/4". 2ND, Also looking for 2 wheel bracket assemblys and 3RD, 6 replacement wheels.

Hello! We are needing to replace the rollers for one set of closet mirror doors they are the Monarch brand. Below is a picture of the roller that I am needing. Do you sell this product and can it be shipped to me?

I am looking for a 6ft closet door track per the attached photo. Color flexible. The other parts are there for reference.This was installed when the house was built in 1986. The builder only used the cheapest of the cheap materials, so if there is anything better that will work with the existing doo ... (cont.)

On Part in shows: "CONTRACTORS WARDROBE 10SW11 002"

Is this available The roller is concave The wheel is 1-1/2" The insert is 1 3/4 x 2 5/8 x 1/2 Thanks

Hey Tom, I attached some pictures. Pretty sure I need the 23.028 roller. As far as the rail it seems either 23-272 or 23-355, right?... Now do I need to worry about the width of my existing rail or it it pretty standard? On the pictures the wheels are off track. Thanks TOm!! Xavier ... (cont.)

Need to replace the track & wheels on our sliding Monarch Mirror doors. Looking on your website, it appears that #23-240 48" track would work along with #23-199 wheels. Am I correct? The doors have been in place since 1972