Viewing all customer Discussions for:

23-031 Door Hanger, 1/8" offset

I hope you guys could help me out I cannot find this part. The information on the part says. 452. 3/4 rear 1- 3/8 front. Thanks for your help.

Hi Im not sure if this is a 1/8 offset Thanks for your help

I am looking for replacements for this closet door caster. Markings: 3/4 rear on backside of actual caster piece. On separate piece it looks like a logo of LB; then"to lower door" and US PAT 3041657. Thank you!

I need a sliding closet door hardware piece with double 3/4 inch wheels. It seems everything at the Depot and the Lowes have 5/8 wheels and it wont fit in the track.Can you help me.Mike T

Us us Pat 3.041.657

My dog just ran into one of my sliding door closets and bent the wheel out of place so I'm trying to get it fixed.

Hello, I need to replace 4 (2 per door) hangers for a closet door. The parts are seem to correspond to the item referenced in the subject lie line (3/4, 1 -3/8). However the parts labeled "Front Rear" and Rear Front" Have different offsets to allow the doors to bypass. I need two of each hangers. ... (cont.)

Hello. Can you please tell me what type I need? I need 16. Thanks!

I'm looking for six Sterling by-pass closet door tandem wheel hangers. The nylon wheels are 3/4" in diameter and are embossed with STERLING 2550 on one side. The offset is about 1/2". The centers of the mounting holes are 2 7/32" apart.

Looking for this replacement in photo

I need a replacement for a bypass door roller patent number 3041657. Is this considered a half inch offset?

i need new rollers for my sliding doors Can you help me locate the correct ones Thank You

Would you be able to help me find this roller or andequal?

I need the size attached. Is this something you have available? 23-031 did not work.

on item 23-031...Is this unit used on front door AND back bypass door? what does it mean 1 3/8 front OR 3/4 back inscribed on the unit.....(Im just trying to replace the roller unit, but it looks like I might have to replace the entire set-up.... Thanks for your reply.

Door is from around 1969 original to John Hancock building construction. Need qty 4.

Identify logo LB patent 3,041,657

I believe these were made in the 60's. There are 2 almost exactly on your website, but I thunk the depth is deeper. The wheel broke off it.

US Pat number 3.041.657

Do you stock a replacement for this part sliding door roller assembly as you can see the rivet broke holding the tandem rollers I have a screw in it considering just putting a rivet in it I cannot find a part number this is a 1960s vintage