Viewing all customer Discussions for:

55-175 6' Hurd/Rivco Snap-in

I received the vinyl glazing beads 55-156-6 and realized upon their delivery that they are the wrong height. Instead of an overall height of 3/4 of an inch, I needed an overall height of one inch. I hope you can help me select the correct item. The width that covers the glass on the exterior ... (cont.)

I need to identify this glazing bead. Both pictures are the same one.

Attached are pictures of the window and a cross section of the existing bead. From your product the 55-050 appears to be the closest picture match to what I need but the 55-175 6' Hurd/Rivco was what we thought we might need if the 9/16" is the width of the trim and 1 1/8" is the depth (down into ... (cont.)

Please see pictures. I have not taken the existing Glazing bead out to replace the glass as it may get damaged doing so. If no replacement, I am stuck. It's from a Crestline sliding window from about 1985-91??.Shows 1321121 and Crestopane 81-91 on inside of alluminum glass divider strip. Glazing str ... (cont.)

I am looking for vinyl stops for Hurd windows. They are all wood and about 20-24 years old. Is this something you would carry?

I have a vinyl glazing stop like your 55-175. It is 1 3/8" on the leg side and 11/16" on the face side. Should be a Hurd window stop for 1" glazing. Do you have them available? Cost?

Just a question, wouldn't a well drawn and legible rendition of the glazing be usable? I need vinyl bead with a 1/4 inch leg, a 1/2 inch face and a 1/4 inch leg on the opposite side with a tiny lip that snaps into the sash frame. I would be happy to send a drawing if you will ok it. ... (cont.)

Looking for replacement snap in window glaze trim. White vinyl....."L"shape.....1/2-or 9/16" on face of window, with slight bevel last edge And 1"to 1 1/16 deep into channel, with2 small parralell ribs deep info channel , toward glass side. Thanks for any guidance toward your replacement parts ... (cont.)