Viewing all customer Discussions for:

55-175 6' Hurd/Rivco Snap-in

Please tell me if you stock this item.

They are Hurd windows circa 1988. This was the best I could do with profile pictures, vinyl is dried out and cracks when attempting to remove them. Please help me. Tim

Replacing glass but need replacement glazing bead for 1 window Window is a double hung Hurd window Glass thickness is 7/16. Part measures 9/16 x 3/4 Vinyl part. White Window frame is wood painted on outside Need 8 feet. 2@25in 2 at 23

Hi, Please let me know which part number of snap-in vinyl glazing bead (refer three picture above) for my (7) windows. Let me know if you need more information.Thank you,Minh

Triple pane with aluminum stops. Can?t find any numbers other than igcc277cba. Aluminum stops are getting bent when trying to remove to be able to replace the glass. Are there any stops available?

We cannot clean the molding from the existing pieces and would like four new ones.

Hello Looking for this product - in "tan" - or does is only come in white? 6' HURD/RIVCO SNAP-IN Product Code: 55-175

Good day Swisco Customer Service, I have 20 year old Norandex windows in need of snap in glazing. I was unable to find it on the web site or get my pics to attach so sending email. Thanks and good luck trying to ID the stuff...

Hello Please see images of vinyl glazing bead - looking for 120 feet - window manufacture unknown Thank you

Please see the attached photo. Note that the trim, window stops, are off the window at the upper left and lower right of the window frame. I need to replace the trim/stops that have broken. To be sure that I have enough quanity and to address perhaps other windows I believe I need roughly 16 line ... (cont.)

Looking for replacement glazing strips

Hello, I have a bow bay window with multiple double paned windows which I am replacing. The bead is older and brittle, not sure of the window manufacturer or the make of the bead. Its about 1"

Kind of a T-shaped bead, cant find it on your website

Due to hail damage I need what the window and exterior door sales person at GBS in Mauldin, SC called a stop and is the person recommending I contact you. I have a 14 year old glass sliding patio door made by HURD Millwork Co. Inc Series: VSLPD, CPD HUR-N-052. Per the sales person at GBS HURD was s ... (cont.)

Need to re-glaze or find new vinyl trim to finish a new glass installation. A couple pieces on a previous install were damaged and would like to find enough to trim out both glass inserts. I am not able to find any sort of markings on the doors to indicate a brand or model. Hoping that you have some ... (cont.)

I am looking for replacement plastic bead for my windows. The bead is "L" shaped in cross section. THe long leg of the "L" inserts between the glass pane and the wooden frame and has small ridges or barbs that help hold it in place. The short edge of the "L" (about .5") covers over the edge of the ... (cont.)

Do you have different depths for the 55-175 Hurd Glazing bead. It seems like that one is about an 1/8" too long (sticks up about 1/8" about the glass surface. So, I would need the 1 1/8" dimension to be smaller, about 1" Thanks

Looking for vinyl bead for 1980 hurd windows, all wood, glass inserts from the outdoor side. Pics attached. The IGU is 5/8" thick, NOT 3/4". I've replaced 4 pieces of glass in these windows so far so I know how to do this. Old bead has been painted green on the outside. Some new bead is also sho ... (cont.)

These are aluminum glazing beads that are used to glaze in insulated glass panels into existing old Weathershield casement window sashes. These are for 5/8" thick IG applications and Weathershield stopped carrying these last month. There are thousands of windows in my area made like this and I know ... (cont.)

Can you help match this glazing bead. All I can tell you is it is on a Hurd Casement window (see pics).