Viewing all customer Discussions for:

23-070 Mirror Wardrobe Door Roller, Concave

If I am ordering 23-272 track, will the 23-070 roller be the correct item?

1.5 in mirror closet door roller for metal frameThe roller was attached on the left side not from the bottom.

I'm looking to replace 10 wheel units for 5 sliding glass closet doors. I looked on the wheel unit picture included for any model numbers, but nothing is marked. The current unit wheels are not removable, so it looks like the entire unit needs to be replaced. The glass closet doors are 35 years ol ... (cont.)

rollers for truporte mirror interior sliders bought at home depot the wheel surface on the roller rides on a rail i guess you would say not in a channel. i need two for each door

bottom roller, metal frame mirror sliding closet door. Roller 1" Need help finding a replacementThanks in advance, John

I need 2 of these, only 1 plastic roller broke but I though I would replace both on 1 door

Ooh 21-717 21-787 21-718

I need 2 of these rollers. Holes top to bottom 1 3/8" on center roller nylon 2 1/4" side to side 3" edge to edge across top to bottom on side 2 3/8" Do you have anything close to this I am not sure what brand the mirrored door is I do know it is over 25 years old.

hello i need on of these top brackets and 60 inches of track for the pictured roller typemoira

do you have a replacement for a COX 21-717 21-767, believe it to be concave and sending pictures of rail as well in order to confirm. would like with BB if possible.Thank you in advance. Ildiko

Where can I buy this 1 1/4? nylon wheel size

Hi Swisco, Can you advise as to the rated weight for one of these , please. I have heavy sliding doors and want to order the correct amount per door on consideration of the limit for these 23-070 assemblies. Thank you Swisco, Regards Shaun

I am looking for the bottom track only and am having trouble just identifying what I have. Attached are pictures of the track as well as the bottom hardware that rides in the track if it helps with identification.The track pictured is 3 15/16" wide.ThanksRich

Hi my name is Jackie, I need a new bottom track for my sliding doot. The weel is Cox 21-717 and 21-767. The track do not have a numbe. All I need is a track

It is identified as COX 21-717 21-767

T have wooden mirrored doors. I have a 1 1/2 cut out to fit the roller assembly to fit in. I need more information on the measurements of the 23-070 to see if will fit my doors. Thanks,Fred

2 pictures of bottom roller and one from top of sliding mirror. Possibly from Cox

Hi there, am finding it very difficult to find a replacement for our mirror doors on our wardrobe (photo attached). The wheel is concave. Thanks for any advice. Dermot

Please see attached, I checked 23-086, 23-028, 23-070, 23-081, 23-064, and I cant find a perfect match to the rollers I have. I need to buy 8 rollers that look like the photo attached. The measurements are 1 1/4 inch wheel diameter (white part of the wheel edge to edge, 1 7/16 inch apart verticall ... (cont.)

I am also needing 4 of your replacement closet door wheels COX 21-717/21-767 and have read the above questions. But I'm also in need of 4 guides that run at the top of the doors. Where can I find them as the bottoms are no good without the guides at the top. There are no numbers on the guides. Thank ... (cont.)