Viewing all customer Discussions for:

55-016-6 6' Keller Snap-in

Im trying to replace the glazing around a (25+yrs old) window panel I replaced. The hardware store didn't have the correct shape so they sent me here.

My house was built around 1983. Metal frame windows. Vinyl bead is cracked and missing in some windows. Have been unable to locate bead.

Can you please assist me with finding matching glazing? Approximately 5/8 wide and 7/16 tall. Thank you!

Hello. I am looking to replace all (missing, damaged and existing) snap in glazing with new white if available

I'm looking to replace the black pieces that have curled up on some of my windows. They appear to be plastic that has become brittle..

Hi, our house was built in 1987. The original stickers are still on the windows. We had a BBQ related accident, and it melted most of the snap in glazing on our window.

hi, please review the attached pictures of my original snap-in glazing; will 55-006 work as a replacement? Thanks, jeff

Looking for this snap-in window glazing... any suggestions on the actual model number? The glazing is extremely brittle (picture shows glazing wrapped in tape to hold shape. Constructed a SketchUp model with dimensions to assist (attached). Thank you

Have a 1963 Canned Ham trailer. Looking for window glazing replacement. Attached is picture and measurements. Ok with replacing with vinyl or aluminum.

I suppose white beads can be painted over as well. I hope the caliper readings are good enough. If not, kindly let me know if I should add more photos. Thank you.

Can't find in gray

Can you please help me identify this vinyl snap in glazing? I previously purchased one that was 9/32 in. x 1/2 in. (see the picture) but it was too big to fit into the opening and did not have the small grove along the edge. I don't know if the small grove matters as long as it will hold the glass i ... (cont.)

Looking for replacement aluminum parts that hold in Windows. Those cut to length angular pieces.

Hi, I hope you can tell me what style of glazing bead this is. I don't know the brand of the patio door and I would like to replace the bead. Thank you

Trying to figure what part # this is. Have no idea the brand of window. Thanks!

Swisco, I recently discovered a cracked window in my attic and would like to replace the glass. Attached please find a picture of the glazing bead I need to replace the glass. Let me know if I can order the replacement bead from a local distributor here in St. Louis Missouri or through Lowe's or ... (cont.)

Looked at capital was close in size and shape

I am looking for window glazing for single pane aluminum frame windows that is 1/2" by 3/8". The current is grey but any color with same profile or a profile that will work is fine as we are redoing all of the windows..

Hello, We are not sure which window leaf bead to order. The flat face that sits on the glass is half inch; the other side that sits on the window frame is 3/8 inch. We include 3 pictures. Thanks, Sunny

I am a homeowner looking for replacement glazing bead for some aluminum windows