Viewing all customer Discussions for:

55-080-6 6' Snap-in

Looking for Glazing Replacement Bead . Do not know window manufacture.

Don't see this trim piece as an option.

this is the piece that I'm having trouble with

Please see the attached photo. Note that the trim, window stops, are off the window at the upper left and lower right of the window frame. I need to replace the trim/stops that have broken. To be sure that I have enough quanity and to address perhaps other windows I believe I need roughly 16 line ... (cont.)

I could not find any identification on the snap-in glazing bead from our windows. The glaziers that replaced our double-pane windows identified the glazing bead as Alenco. Using the sketch provided, would you tell me if you have this glazing bead (or equivalent) in stock. Thank you. ... (cont.)

The plastic molding (glazing bead) on my Alenco window was ripped up by the window lock. The length of the piece is 55

Hi I have Jenco windows installed in 1992. recently had the glass replaced but they only could save 3 of 8 glazing strips. They are 5/8 wide. I need 4 22" and 1 36". Do you carry anything or have a suggestion. do you think the 6' SNAP-IN Product Code: 55-080-6 is a match Thanks bunch bob ... (cont.)

Hello I spoke to one of your reps and they told me to email in what I need. I have Gapco windows and I need the glazing bead for them. I saw an email chain on your website where a customer that has the same bead that I need was told to buy the 55-080-6 glazing bead but it was too large. Was ... (cont.)

We are having trouble locating this molding. Can you please help!

I'm trying to locate replacement vinyl glazing bead for several windows Any assistance you can provide would be appreciated. Joe

I need about 7 8ft sticks

I have a gapco window series 151 that I need a snap in glazing.

One size is 5/8 longer size is 3/4

Hi, I am looking for glazing bead for a vinyl picture window. I could not find a manufacturers name or any identifying marks on it. Hopefully the pictures will help. The glazing bead acts as a spacer between the window and the frame. The part with the hole in it is the part that sits in between the ... (cont.)

Dear Sir or Madam I am looking for window glazing like the one in the picture I have sent. The right hand side of the picture measures 7/8" and the top edge measures. 5/8". My windows were built in 1991. I've been only changing the panes of sealed glass, rather than replacing the whole window. The ... (cont.)

It looks like the glazing is dried and starting to come off the window part completely. It's very thin and looks like it snaps in or sits right under the glass.Please help I am not sure how to fix this.Thank you

I have an older Alenco double hung window with glazing that looks like these in the picture. Each side measures 11/16 with the small tip being 1/16. I thought I had seen someone with a similar question and you recommended your 55-080-6. What

Our house was built in 1998 or 1999. We are second owners. Windows have no markings. Glazing is white in color. I looked on your website. Closest style I found was 55-080-6, but that model has an extra turn down and dimensions are off some. Please check for correct replacement part. ... (cont.)

I am trying to locate glazing bead or glass retainer or stop for MW window in a v shape and is 3/4 inches on each side with a grove your assistance would be appreciated. jody

I am looking the attached glazing bead. I found item 55-0806. It seems close to what I am looking for however the part that goes into the glass is just a bit longer. would I be able to trim this to make it work.