Viewing all customer Discussions for:

23-504 3' Bifold Door Track and Hardware Kit, 2 Panel

I know this is a long shot but figured it was worth a try. During a recent renovation of a built in 1960 home, the top pivot hardware for the bifold doors in one room were misplaced and lost. I'm trying to see if anything like this old style still exists or if there's anything newer that would be ... (cont.)

I need a bifold door top bracket that is wider than the 7/8 in brackets commonly available. The interior of my top channel is a full 1 inch. A 7/8 in top bracket slips out of the lower flanges of the track. Thanks!

Hi, I need to find a rail/upper brackets and bottom pivot brackets that will work with 2 different set of wood, bifold doors. (Full louver) The upper pivot pin is 1/4" and roller is 3/4" or 13/16" and the bottom plastic pin is 3/8" (bottom), 5/8" (top). (Half louder) The upper pivot pin is 1/4" ... (cont.)

We have a 90s style bifold door...2 sets for a bedroom closet. We have the original metal track. When we bought a new hardware set, the bumper doesn't fit in the track. Some people call it a Snugger as well. It's the little spring that sits in the middle of the track to keep the doors from popping o ... (cont.)

Hello...so here's my bi-folding closet doors. The top tracking hardware is basically missing. Can you help?

Hi. I'm installing new doors in a new rough opening of 60". I have a pair of 30" x 80" doors (see attached). What hardware do yoh recommend d and can you put together a hardware package for me? Thanks for the help!

Do you have the track for this product? Product Code: 23-146. Ours is in bad shape and bent up.

I am looking for the top of door hardware for a bi-field door that goes with the bi-fold door bracket pictured above. Stanley 2819 or you're pictured 23-306. Mostly the traveler round plastic wheel that fits in the track.

This is upper roller on my bifold doors. The house was built in 1964. I have not found replacements for them and have several missing.

Looking for top rail and all hardware to rehang 130 existing, hollow wood bifold doors. White, almond or mill.Photos and cost please for the first 20 kits... Thank you

Hello We are refurbishing these solid wood bifold doors in our MidMon home, and cannot find any rolling top guidse (3/4" or 5/8" wheels) to match the existing system which I do not want to completely replace if at all possible. Two of the four top guides are missing I have combed the internet and c ... (cont.)

This is a heavy thin bi-fold door assembly. Please help!

We have a 36" track which is 1" wide needs replaced since it is somewhat bent. We also need the following hardware replaced. Please advise on what to order. 1. Track 2. Hinges 3. Roller 4. Top mount 5. Bottom mount

Top pivot bracket that bolts inside top track. 1/1/8th by 3/4 inch

My closet door fell off and I can't locate the parts I need to repair it. The hinges and trolley are stamped with the Stanley logo. Thanks so much!!!

Each panel on the door is 15 3/4 inch and the door frame is 32 inches wide. Will this kit ( 23-504 : 3' Bifold Door Track and Hardware Kit, 2 Panel) work for this size of bifold door?

Help,Do you have or can you tell me where to purchase the attached wooden bi-fold door hardware?Regards,Andy

This the channel that uses top pivot bracket Stanley 2819, your item # 23-306. Please let me know if this particular channel is available as you can see that it's out of shape and not able to keep bracket in place. Thank you. Gaurang

I have wood bi-fold door and the top guide rollers on 2 sets of doors have broken. After looking thru your inventory I failed to locate the size rollers I need. My top guide rollers measure smaller than ¾" and bigger than 5/8". It also appears to be between 16 MM & 18 MM. If you can help me find ... (cont.)

Need to replace the hard ware for my closet door. The track is 24 inches wide. There are 2 door that are hinged together.. Can you please recommend replacement parts.