Viewing all customer Discussions for:

58-176 36" Duo-durometer Door Bottom Sweep

hi do you guys have a replacemnet strip for my pella doors? They are just under 2 inch thick between 27-33 inches long could i cut strip to fit the door? thanks

Help...need a replacement kolbe&kolbe weatherstrip early 1990s.

I am looking for the bottom weatherstrip for in swing French doors. Regency style (?). Alum clad wood doors. this will be a DIY

I have a metal exterior front Stanley #28915 door with wood bottom to attach sweep. Swri # is 98038-05-01. Size is 36" wide x 1/34 " thick. I need the decorative plastic that goes around the window

Looking for help finding these door bottoms and weather stripping.

Hi - Need to replace the entry door sweep. Attached pic, door-bottom-track, it shows a "track" the sweep slides on. size - 1 5/8" wide x 1/2" height. Door is 32" wide.You have anything to fit this door? - Jim Thanks!

This PGT door sweep is 1 3/8" wide and 1/4" is the upper sides that slide into the under side of door frame. Door is from 2005. When inserted into bottom of door it's not flat makes its like a bulb bottom.

Door bottom weatherstripping 58-176 This model most closely resembles what I currently have. My entry door is 36" wide, 1 5/8" thick. How thick is 58-176?

Need a pair of these door bottom seals. 32" door. Only 1/4" clearance

I'm trying to find and purchase 4 door sweeps for Pella entry doors. I have an old one so can give necessary dimensions as needed.

Please advise if you carry this door sweep in brown 36". Need two of them.

The door was installed in 2019. Manufacturer is Taylor. Dore is 1-3/4 inches deep and 33-11/16 inches wide. Does Swisco sell a bottom door sweep to fit this door?

Thank you.

Trying to find insert or whole bottom door sweep for my front door. 3 pictures attached. Any ideas

Sweep slides into grooves on bottom of 36" ext door. Thank you

Comes from a very high-end door (96", arch top, very heavy construction.) The top of this sweep had a strip of metal inside. Edges of the top strip fit into flanges on the bottom edge of the door.v

Requesting assistance in choosing proper replacementOld sweeps are: 1/2" long, 3/16" at top of sweepThe door is 35 1/2" wideScott

I have a 36" wide by 1.5" thick front door manufactured by KC door. Do you carry a replacement door sweep for this door?Thank you,David

Kolbe Door is approximately 25 yrs old. Bottom weather strip has cracked off in places. Need to replace.

I need a door bottom sweep for a wood exterior door. Morgan brand I think