Viewing all customer Discussions for:

58-176 36" Duo-durometer Door Bottom Sweep

I have a weather shield door with a beat up threshold. It looks like it's mounted on one stem about 3/8" from the edge of the door.

Hi trying to find replacement sweep for Pella inswing entry door. wood interior, clad exterior. the kerf location looks different than a architect or lifesytle series though.

Good morning,. I am in hopes that you have what I need to make replacements.The door sweep is 32 inches by 1 3/4 width ( outside measurements). The sweep has a thin lip on one side that slides in to a groove on the door , while the triangular piece is pressed in on the other side.The door gaskets ar ... (cont.)

I need a brown sweep Length 35.750 Width 1.750 Thank you

I have two exterior doors that need new weather stripping (sides and bottom). The kerfs on the sides and top are 1/4" wide. No weather stripping I can find locally are any where near 1/4" thick. The current bottom seal is 1-3/4" wide with kerfs that are 1-1/8" apart. The only bottom weatherstri ... (cont.)

Hello, I need some assistance in identifying the proper part to order to replace this door sweep for my client. Any help is appreciated, thank you!

Can't find part number anywhere. Here are pics. Please help thank you.

I need weatherstripping for all of my exterior doors built about 20 years ago I think by Built Best doors and windows. See the pictures attached

I'M TRYING TO FIND THE RUBBER RIDGED TAPE FOR THE BOTTOM OF EAGLE DOORS.

Do you carry this seal?

Attached are three pictures. One of my door, one of the old weather seal that I took off and the third one is a sticker on my door. I am having problems finding a replacement to fit this door. Would you have anything? The old seal was 1.5 " wide with 1" between the grooves. I am at my wit ... (cont.)

Looking to find a replacement door sweep.

You have helped me before and looking for your guidance again. I bought a home with double french inswinging doors that both need new bottom sweeps. I cannot locate a name on the door, but have pictures and measurements (left side 34 5/8", right door 34"). How can I send you some photos so you can s ... (cont.)

I have a Cole Sewell storm door 32" Cambridge Series .. I need a doorSweeper to fit..CA 423047 ..Is this something that I need to purchase from you..Lowes Home Center didn't carry these doors.. Thank you!Janet

Pella Patio french door Sweep in swing french door Purchased 1995-1996 Door Width 1 15/16" Sweep Width @ door Bottom 1 5/8" Space between inserts 7/8"

Every door seal I see has a gap between the kerfs of at least .82 inches. My door requires a kerf gap of .50 inches. Do you have something like this?

Have 2 inward opening French doors whose sweeps are worn out. Need to replace but could not locate any names of the mfr on the inside glass or on the hardware. Let me know if you need a different set of photos to help identify these. The length is 34 5/8 for the left door and 34 for the right door - ... (cont.)

29 9/16" long 2" wide Two (2) mounting ridges (which insert into the bottom channels in the door) are 3/4" apart (wide) and 3/8" high

Broken Bottom trim on outdoor front door

This is on a sticker on the top of the door: OE# 519349 ITM# 4N8064 Prehang G-Flush 2/07X6/06 Jeld Wen Door Systems North Springfield, VT NFRC-52-2 01-M