Viewing all customer Discussions for:

26-390 Slim Top Tilt Latch, LH

I have ordered 26-292 from you before but can no longer find them. I ordered 26-244 & 26-243 because they looked similar. They are too thick and won't slide in the space for the latch. Do you still have those items or something that would be the same size?

Measurements: 2 7/8 X 3/4 Need 4 left and 4 right side locks.

In search of these locks I need 20 thank you Thank you, Scott

I have Traco windows in my home and a part has broken. I wonder if you can help me find a replacement piece. I would like to order about a dozen (half RH/LH) if they are available. Attached is a picture of the piece I need to replace.

I am needing to replace these tilt window latches as part of an inspection to sell our home. Attached are the pictures of the current latches. They measure 3" long x 3/4" wide x 5/16" tall. The only markings on these current pieces is (.075).

says on bottom of tilt latch 5R and .075 down near end that retracts with it retracted says pat pending5,139,291 Latch is 2 7/8 inches long(main body) 3/4 inches wide

I require 4 LH and 4 RH latches as replacement to the one shown in the photo. What is the part # I should order and how do I replace them? Thank you, Jacob

I just purchased your 26-390 and 26-391. the only difference i just noticed is the tip that goes into the slot to keep the window secure is curved where the one I purchased is straight, measurements for the piece are correct. will the curved tip vs. straight tip make a difference? ... (cont.)

Tenant left and noticed old latch missing. Unable to determine what latch would be the best fit. The one on the left side of window is still there, but missing on the right side. Please help.

I would like to replace this part. I've included: 15L Patton: 5139291 that is inscribed on the part. The visible glass, 16x24, of the bottom section is broken, and needs to be replaced. Do you sell the entire window or the bottom half? Thank you for your assistance. Best, Hannah

Hello. I would like to order both left (shown) and right window latches.

2 5/8 inches long, 3/4 wide, and 5/16 deep. I'm having a difficult time locating this part. No name or number on the part or window.

Angled tip broke off,from inside of room looking out, it is the one on the right side of window.

This part stops the window from tilting in when open.

I need replacement for window locks in attached file. The larger window lock has part # of 536-B w/ a capital L (possibly for left side). The associated window has "DACO" inscription. I don't have any additional info for smaller lock.

I have a difficult time finding this replacement part. The window manufacturer is out of business. Do you have this part... The color is Beige/Bone color. Thanks Paul

The window/Latch is from a builder grade window from about 1994 or 1995. The dimensions on top are 2 5/8" X 3/4". My apologies for the pictures. I can get better ones if need be. Thanks, Greg

Need the tilt latch for MW Freedom 600 EZ Tilt vinyl DH window sash. Originaly purchased in 12/2008 the manufacturer has since been bought by PLY GEM and no longer uses the same part. Picture shows old part (top) and replacement from plygem (bottom) which will not fit, too big. do you have these? ... (cont.)

Looking for window latches LH, the size is 2-7/8, 3/4, 5/16 I think it is 26-390. Just want to confirm is that correct based on the image or should it be something different.

I have a few of these broken around my house, all the same. Do you have a replacement? if so, which model? I measured the latch to be just short of 3" long. Thanks. I was very glad to see you offer replacements. Have needed to fix these for years.