Viewing all customer Discussions for:

26-390 Slim Top Tilt Latch, LH

I have single hung vinyl tilt windows. I need to find both left and right hand latches that slide into a mortise that has been cut in the top of each lower sash. See pictures below. I am including pictures of a good latch. It is 27/8" long and 3/4" wide. I also need the left side window lock t ... (cont.)

Hi guys, I need surface release replacement mounts for Traco double hung windows series TR 4300; I took a picture of label,can mail it if needed but,rest of it goes as follows; 851771 062503 202-008 I appreciate your help and would like to order parts if you have them ASAP

Found the pictures and measurements very useful and have identified the part I am looking for but I only see it in white. I am looking for part number 26-390 (Left and right side) in ivory/light beige.

Good morning. I'm looking for replacements for the latches on my windows. I came across your website while doing a Google search. It looks like you have similar parts that I need, but the sizes on the latches on your site don't quite match up. The closest one I see is P/N 26-390 and 26-391 in ... (cont.)

I had asked about replacements, in early July (case # 17425), and received a reply, from Tom .... instructing me to take photos of the broken part. I tried to send them today, but my e-mail was rejected, as addressee unknown. I have enclosed my 4 photos, below. I await your reply .... on my next ste ... (cont.)

Hi, I am in need of a tilt window latch 2 15/16" L x 1 3/4" w x 1/4"d. The brand of the window is not available. Thanks, Leslie

We need left & right side replacement latch's for our Traco window. Can you help?

I am looking for the window latch for a traco tilt window. I am thinking it is the 26-243. I need both left and right. The latch has a patent number of 5.139.291 with another number of 2R. I have attached a photos of the latch. If you need I can send you the latch itself. Thank you. Lynn ... (cont.)

Trying to find this latches. Contacted the manufacturer of the windows who is "Traco". They sold the part of the company and have no idea how to reach them. Umberto

I need all four replacement parts. Balance block, Coil, Pin and latch in tan if you have it. Thanks Dwight

Latches are Flush mounted,2 7/8" body by 3/4", White Cant Completely ID ...... Help Need 2 Right & 2 Left they have no Screws they slide in & have a catch that keeps them from sliding back.

I am looking for some tilt latches for some traco vinyl windows. Included is a picture. The latch is roughly 3 inches long and a little under one inch wide. Model 26-391 looks the closest to me but I am unsure. Any way you could help me identify the correct pieces?

I need internal tilt window latches. they are 2-3/4 long X 3/4 wide X 5/16 tall. 3 photos attached. Thank you, Gil

This is from a double hung tilt vinyl window. Please see pictures for measurements. The latch slides into an open space on either side of the window as opposed to securing to the top or side with screws. Thanks. Thea

I have Traco residential single hung replacement windows in my house. Two of the windows have broken tilt latched that slide in to a channel on the top of the window. The left and right appear to be the same. They are not spring loaded and have a plastic clip on the bottom that holds then in the cha ... (cont.)

The 26-390 looks like the tilt latch that I broke on the bottom sash of one of my windows. Does this part come with instructions on how to remove the old latch and install the new one?